Tasodin Water-Resistance IP65, 12V Waterproof Flexible LED Strip Light, 16.4ft/5m Cuttable LED Light Strips, 300 Units 3528 LEDs Lighting String, LED Tape(Warm White), Power Adapter not Included

Lights were very easy to connect to an existing circuit and switch on my camper, despite the fact that no instructions were provided with the product. Cleaned the side of the camper where they were to be installed (under the awning on the fiberglass siding) and allowed it to thoroughly dry. I then connected the wires and turne on the switch to make sure the lights functioned. I then started peeling the backing from the adhesive side and slowly sticking it to the camper. I must say the length was almost perfect. After installation I again switched on the lights to verify functionality, all appeared well at this point, very bright all LEDs appeared to be working. Two weeks later I am getting ready to pack the camper for a trip, all my lights are hanging down the side of my camper and in the dirt on the ground. I tried in vain to re-attach them to no avail, the adhesive simply would not hold

These lights are well with the money. They are easy to work with and the silicone coating really makes it nice. My only complaint is that the adhesive isnt all that great, but thats easy to overcome with a little hot glue. I work at a bar and leave the lights on the entire time 4-6 hour at a time.

These lights do not completely stick no matter what I do. Theyve fallen down numerous times & I thoroughly cleaned the surface with alcohol first & let it dry. They do not bend well, so they dont go around edges or corners. The connection also buzzes, which could be the adapter & not the lights, but dont know. Not worth the aggravation.

I cut a short 5 foot section and wrapped it around the bowl of an outdoor dry fountain to provide a nice glow from the fountain at night. These are perfect as the light is warm, not too harsh. The thing that impresses me the most is that they have remained in full working order after 6 months in the Arizona summer. The fountain is not covered, so they have also been soaked in the occasional rains we get. The backing tape looks pretty beaten up, but what do you expect in the harsh environment they are being used in. I love it when something inexpensive totally out performs expectations.

I have ordered 3 reels of these lights for my boat to accent the living area. They are nice and bright. One package came with no connectors or instructions, luckily I ordered connectors separately. The second package had instructions and connectors but the inconsistency could diminish this products quality. The adhesion was the weakest point. Please use 3m adhesion only. I had to tie wrap these to some existing lights I replaced. Once I got through that the lights add positive atmosphere to our boat with just under 2 amp draw for 1.75 reels.

Replaced the obnoxious bright blue-white lights that came with our travel trailer. We often travel for astronomy-related events/trips, and wanted red outdoor lighting. This roll has been mounted for almost a year now, continues to work great, no problems with adhesion. Easy to hook up to the existing 12V DC power outside the camper.

I used these for rear parking lights and under glow on my golf cart, and it is awesome. The product is great. I had to cut a few pieces and I had a difficult time getting the plastic replacement ends to work. Once I figured out how to get them to work it was a lot easier. The adhesion on the back isnt great, I used 3M super weather strip adhesive to get them to stick to my golf cart, but I was still very happy with them.

Definitely not Orange, more like Yellow

I used this to make an illuminated stripe in my garage to park my car. Installed it in a section of extruded aluminum, such that the tape is enclosed so the car tire cannot damage it, and yet it still lights up as a parking stripe. So far so good.

First, the strip light itself is very attractive. I purchased this specific model because I have an outdoor application. The strip has a rubberized cover that protects the LEDs and contacts from the elements. HOWEVER, due to the bulky cover, it is not directly possible to use the strip connectors to tie strips together (or cut and splice). One has to completely remove the cover with a sharp knife and take care not to cut into the strip itself. All of the rubber has to come off to expose the contacts. I can already tell, after one connector fix, that its going to be a lot of work to turn this into 5 short segments with wires and connectors bridging them.