SimbaLux Acrylic Sheet Clear Cast Plexiglass 12 x 24 Long Panel 1/8 Thick (3mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

I can easily describe this product: High Quality

I ordered these because I was unable to get white acrylic locally. I have just ordered my second batch as it was perfect for my needs. I have been sublimation on the laser cut blanks and I am really pleased with my results. The only downside is that the masking is really strong and I have broken several nails trying to get it off, but I would rather have that than loose masks.

Cut residue doesn’t come off. Bought this sheet for an illuminated acrylic sign and the cut edge left discolored and contains a residue that I can’t remove. Tried alcohol, nothing. Nothing sure this is 100% cast acrylic.

I purchased two sizes of this, 12 x 24 and 12 x 12. I would have given these 5 stars because they are nice, thick (1/8 inch) clear pieces of plexiglass that arrived in perfect condition. Based on other reviews, I felt confident I could use these as covers for my rimless nano tanks. I was able to use a circular saw, drill and a jig saw to make the cuts I needed to without a lot of hassle and no cracking or scratches. Here’s where the 2 stars come in. Within an hour of setting these on the aquariums they both warped. The centers sunk in and the sides rose up until the edges were sticking up a good quarter inch above the rim of the aquarium. Aside from looking bad, it’s also not good for keeping snails and shrimp from wandering out of the tank. I’m truly surprised that something 1/8” thick would warp so badly since these replaced two much thinner panels of plexiglass purchased here on Amazon from Lexan. The thinner pieces had been on my tank for months with no warping. I only purchased this brand because I wanted a longer piece and it was in stock. Based on how it arrived and how much sturdier it appeared than the Lexan, I right away ordered the 12 x 12 for my smaller nano tank. Very disappointed with the warping and will be going back to Lexan. Pictures are of the 12 x 12 sheet. I had to take the 12 x 24 sheet off for the safety of my tank inhabitants.

It cus real good with my laser I will be doing lots of projects with them.

It’s what it’s supposed to be, so no fault on the seller/maker, but it’s way to opaque for my needs. If you hold it up directly in front of a light, then some light gets through. I was hoping for more of a diffusion kind of thing for LEDs.

These ended up being the perfect size for my project! They also cut beautifully with my laser!

Covering some feral Cat houses I have.

It was perfect and just as described.

My only wish is that you could get this in a 24x36 size. The 12x24 was a little narrow to work with.