SimbaLux Acrylic Sheet Clear Cast Plexiglass 12 x 24 Long Panel 1/8 Thick (3mm) Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft, Easy to Cut

It’s what it’s supposed to be, so no fault on the seller/maker, but it’s way to opaque for my needs. If you hold it up directly in front of a light, then some light gets through. I was hoping for more of a diffusion kind of thing for LEDs.

Product received was indeed of high quality and was precisely what I was looking for to replace a broken glass picture frame. However, after I had resized the sheet to fit the frame and upon removing the protective covering, I was shocked to discover multiple scratches on both sides of the sheet (3 to 4 multi-inch long scratches on both the left and right side of the sheet). These scratches were not detectable with the protective film and were clearly present prior to the film being applied. Although the scratches are not highly noticeable with my application, they are present and can be readily seen if you look for them. I would have appreciated knowing, prior to purchase, that the product was scratched so that I could have planned in advance. As it turns out, the portion of the sheet that I cut-off during resizing had the least noticeable scratches (see picture). Again, if I was aware of their location, I would have cut-off the other side that had the more significant scratches.

I like how it is protected on Both sides of the acrylic with paper. It is easy to remove after I laser etch it.

Whats there to say?.....the size is accurate and the product isnt scratched.

on some, the covering was very difficult to remove, but others it was fine. fold the paper/plastic cover back over itself and keep steady pressure and it works best.

I bought this cast acrylic to cut on my CNC router for a flag disply box I am making. Came out nice.

Tried to use the 12x12 sheet as an aquarium lid for a small aquarium, but it began to warp within hours and progressively got worse until the corners were sticking way up and causing huge gaps. Perhaps for other purposes, it would work better. Return process was painless.

I play a lot of outdoor music gigs. Usually, I just use clothes pins to keep my music pages from blowing off my stand in a breeze. Then I had this idea to put a piece of plexiglass over the music. No more blowing away, no more flapping. I used my grinder to round off the corners so it doesnt snag when I slip it in our out of a bag I made for it (basically, a pillowcase) that keeps it from getting scratched. Its the perfect thickness--not too heavy, but stiff enough to work. Worthwhile investment if you have a similar need!

very good transparency, and easy to cut, I suggest that you use an electric tool to prevent the edges from falling apart, put it in my sliding window of a GMCvandura G2500 1991. I recommend this product.

Cut perfectly! Replaced my garage window with this plexiglass.