J-B Weld ClearWeld 5 Minute Epoxy, Clear, Syringe, 2 Pack, 50112-2

Adhered canvas top to rear window glass of convertible along bottom edge. This item didnt set up quick enough to fix this problem to begin with. I first used M50 GUOELPHANT instant adhesive for shoe repair and all purpose, sets in 10-30 seconds, from amazon. This helped to bond the rigid canvas to rear glass in reasonable time in small sections at a time. After this used JB Weld clear 5 minute quick set to apply a 1/4 bead along canvas top and back window seam. If you try this particular job clean and dry all surfaces well to insure a good bond.. Also used a wooden cuticle stick to mix and apply the JB Weld..Hope this helps someone..

Exactly what I needed easy quick use and goes on clear but a tiny dot spreads big, value is good goes a long way but you will need to purchase more tips if you’re going to use after one use and it is a small tube but seems like it will go a long way and be able to be used a lot.

Much like other glue-

Works with about 5 minutes of pliable time before starting to gel. Takes a full day to really setup hard. I clamp or appy pressure with weights for good adhesion. The dual dispenser eork pretty good but you need to make sure no air pockets or you wont get the proper proportion of mixture. I like it... holds well.

Set time was more like 5-6 hours on a hot socal day. Other than that works as described.

This product is so easy to use and the strength of adhesion is fabulous.

The first time you use the tube, everything is there to make it a really great glue. Ill have to wait for subsequent uses to see if its still usable.

A while back my front bumper got caught on a low curb and ripped off so I quick fixed it with duct tape which looked awful but allowed me to drive. Anyways I figured I needed a real solution and I really didn’t want to pay to have it fixed for cosmetic value. I googled “liquid cement” and this stuff popped up and looked most like what I meant lol so I gave it a shot. Wow I’m impressed and I feel stupid for not having done this in the first place. 5 minutes to dry my a**! Maybe it depends on the surface but it took a about an hour before I could remove the tape without it falling. I kept trying to take the tape of every 15 minutes and it had gone from liquid to this strange milky goo then to clear and hard . Anyways it worked! I didn’t do the neatest job but it looks waaaaaay better than duct tape! Now to remove the duct tape residue. Huge note, don’t use this stuff inside! Or if you do ventilate the room! I used it outside and the smell was extremely strong.

As described.

Is really strong, I used to put some bathroom appliances, the only problem is that is too liquid initially. Your probably need to use some soft tape to keep things in place while it cures.