XiKe 10 Pack Blue 2 Nylon Garage Door Roller 4 Stem, Quiet/Durable and High Load, Use 6200-2RS Double Seals Precision Bearings.
-
Kenneth C Erekson
> 3 dayHavent even attempted install yet. Just opened box and discovered the rollers to be extremely worn and heavily used
-
David Vera
> 3 dayRollers worked great. Quite easy to replace. Remove bracket, slide old roller out, slide new roller in. The bottom one was a bit harder since the bracket is attached to the cable. Found it easier to loosen the side rail as shown in my photo.
-
Mike Jones
> 3 dayI usually dont write reviews, but my garage door when squeal like a banshee. Sprayed lithium grease and still wouldnt help quiet the original steel wheels. As soon as I popped these in, (insanely easy with a 90* drill), I heard nothing. Complete silence. I literally thought I lost my hearing, thats how quiet they are. No longer do me and my wife wake each other up coming home with the squealing door.
-
Karen Beyl
Greater than one weekGood quality brgs.
-
Customer
> 3 dayJust outstanding. Installed in about 30 on a standard 7’ door. No need to bend tracks and never be able to bend it back smooth again—remove the actual support brackets of the vertical tracks off the wall and install these without removing individual brackets on the door. Once I put these on and paired with a belt-driven door opener, I never would have imagined such smooth and quiet operation. The rollers I replaced were ball-bearing nylons but it was due for replacement as you could hear grit inside and feel resistance to each. These are wonderful and you can’t go wrong.
-
R. Knowlton
> 3 dayI had no idea that my original 40-year-old metal rollers were responsible for so much of the noise coming from my garage door. The new rollers took away about 75% of the noise. I also noticed that the door rolls much more smoothly and the garage door opener doesnt seem to have to work so hard. Excellent preventive maintenance.
-
Sarai Casper II
Greater than one weekIt did exactly what I wanted it to do smooth and quiet
-
Paul Y
> 3 dayWell made Good Quality. AFTER WATCHING A VIDEO. VERY EASY TO REPLACE
-
SR
> 3 dayThis produces the same noise level as conventional builder provided ones. Noise is too high.. waste of purchase
-
Noones Fool
> 3 dayAfter installing these, the noise level of my garage doors opening and closing was reduced A LOT ! ! ! The rubberized (poly ?) wheels make all the difference. It’s like the old metal wheeled roller skates (if you’re old enough to remember them) compared to the new rubberized wheels they have on skates now. INCREDIBLE difference. While you’re at it, check your pulleys. The bearings in mine were shot. Replacing them helped with the noise a little as well, but not to the degree the wheels did. The only difficult wheels to replace were the bottom ones, which are attached to the bottom of the door in a different manner, which meant I had to move the rails to access the hole where the wheels ride.