XiKe 10 Pack Blue 2 Nylon Garage Door Roller 4 Stem, Quiet/Durable and High Load, Use 6200-2RS Double Seals Precision Bearings.

Replacement for older metal rollers. Easy to install, substantially quieter than metal rollers. Seem to be holding up well.

perfect

Installed myself and it worked, garage door is much quieter while opening and closing.

rollers really made the old door open smooth. With new hinges and track cleaning old door has new life. Had to trim bottom roller shaft other than that went well

It took about an hour to change the 10 rollers. The hardest are the 2 at the bottom of the door because the cable is attached to the roller bracket. I had the door completely open to be able to pull the roller down to screw the bracket back into the door. Makes it a lot more quiet.

I am happy with the purchase but one of the 10 rollers broke into two pieces-it was the last one I was installing-need one replacement-

These are better than the white rollers that are on sale through Amazon. The original set I purchased half of the rollers were crooked/bent. They installed easily. All I did was unbolt 1 hinge at a time to replace the roller. No need to bend the track.

They were easy to install and they are much quieter than the old ones.

Nice replacements for the steel wheel rollers. Easy to install. Definitely helped in noise reduction as the other rollers where 17 years old. Remember that while you have these apart go ahead and spray some chain grease onto the moving parts of all of the hinges. The bottom rollers that the spring lift cable are attached to need to be removed while the door is in the up position so that most of the pressure from the torsion springs are released. There may still be some spring tension even when open so you may have to hold back the tension on the torsion spring while removing these two rollers. The rest can be removed with the door closed with out issue.

Easy to install. 30 minutes & I was done. I can’t believe it’s the same garage door! It’s so quiet now.