Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Rather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.

I used this on an Intel Core i7-13700K with an ARCTIC Liquid Freezer II 420 for cooling. With the stock frame a few of the cores kept spiking over 100C under load, forcing them to thermally throttle. Since the same cores were overheating every time, it seemed like the CPU wasnt properly mating with the cooler, which is exactly what this product is designed to fix.

Excellent product.

When I bought my i7-13700K, the CPU would randomly spike to 100 °C while idle and stay at that temperature for 4 to 5 minutes. I upgraded my CPU cooler to a corsair 420 mm CPU watercooler, but the same issue occurred, although it didnt stay as long at 100 °C. The problem disappeared when I switched to the Thermalright contact frame. I also noticed an improvement in the average temperature of the CPU at idle and under load. It is clear that this contact frame helps the CPU behave in a better way, especially for a CPU that is known to overheat.

I was a little nervous about installing this at first, but it was surprisingly easy. I placed it on my 17-13700K CPU and I noticed my temps went from Mid 40s to high 30s while in windows, and when running Cinebench I went from low 90s to mid to low 80s. Overall highly recommend if youre comfortable with taking apart your computer. Takes less than 10 minutes.

Works. Got my temps down a little bit.

13900k/Liquid Freezer II 360/Z790 Aorus Master - no improvement in temps unfortunately. Well built and easy to install however.

Multiple cores of my i9-12900KS CPU always peaked at 100 degC during Cinebench R23 multi-core tests conducted at 21 degC ambient. I tried several thermal paste application methods/patterns, ...but following AIO pump assembly removal, the paste residue pattern was always evenly distributed with no evidence of CPU IHS cover bending/warping from the motherboards standard LGA1700 CPU mounting solution.

Overall, Good frame, unfortunately I took off my old thermal grizzly (TG) paste and I went from an idle of 35⁰ to 42⁰ on a 13700k. So I reseated the cooler, same story. Finally I went to my microcenter and in a last ditch effort got more TG. After applying it, my cpu dropped to a cool 30⁰ this frame cost a fraction of TGs and gave me a 5⁰ drop and under load got my cpu to stop thermal throttling (on a liquid cooled system mind you)

I was skeptical, but after struggling with my OC 13700K temps despite custom loop I decided to give this a try. No change in ambient, test, or overclock with a 12 degree delta. 12 degrees for a ten minute installation is massive. Cinebench caps at 88 now when I was hitting 100 and throttling previously. 5.7ghz all core and happy.