Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)
-
Quincy Torp
> 3 dayI cant fault the Unit but I had underestimated that it wasnt just height or width issues but I needed to relocate the GPU and that had to be slot 3 due to Z270 requirements which buried my Sata connections. It also sits too close to memory for my liking but the Unit is brilliant although my Z270 re-jig took two days. CPU temperatures are now below the Kraken X42. I use an Enermax Giant box and only just fitted it as the side fan enclosure drops down into the box. Now done/up and working and quiet and cool and a 6 year warranty.
-
Peter in Huntsville
> 3 dayI replaced a 240MM rad watercooling setup with the Noctua on a i7-6700K.
-
GreenChaos
Greater than one weekBought this to replace a Corsair AIO that failed and works good on a 220 TDP Processor. Would be 5 stars but one of the Included fans makes a decent noise (thinking it might be a bad bearing) where the other fan is dead silent.
-
Skystar
> 3 dayAmazon hat sich mal wieder alle Beine ausgerissen. Freitag abend bestellt, Samstag vormittag geliefert. Was will man(n) mehr.
-
Jack
> 3 dayTruly a beast of a cooler, this thing will cool any CPU down to the mid to low 40c range. Very big form however I saw an improvement of -20c from my previous temperatures. Overall possible the best CPU cooler I’ve ever seen.
-
Javier Rodriguez
> 3 dayKeeps my intel core i5 at 24 degrees celcius at idle and 54 degres celcius under load. I think the only negative is that its really large and only fits in the biggest cases with low profile memory sticks if you use both fans on it.
-
Ali Mohd
Greater than one weekI upgraded from a Coolermaster V6 GT to this cooler to cool down my old trusty i7 870 with a moderate 4000 MHz overclock.
-
william
> 3 dayTo my supprise this air cooler out paces my beloved 7 year old 240mm nzxt kraken and then some. Was even Abel to overclock fx8350 from 4.0 to 4.7ghz at comfortable temps.
-
MurrDog
> 3 dayEveryone knows that this is one of the top air coolers on the market. One ongoing problem with this series -CLEARANCE. The ram is always a problem - can only use one fan
-
Krannos
Greater than one weekRapida instalacion y funciona super estupendo
Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.
|
|
|
|
|
|---|---|---|---|
Widened fin stack and expanded heatpipe layoutCompared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency. |
High RAM compatibility in single fan modeThanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm. |
Dual NF-A15 140mm fansThe NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market. |
NT-H1 thermal compoundNoctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments. |
Measurements
- Height (without fan): 160 mm
- Width (without fan): 150 mm
- Depth (without fan): 135 mm
- Height (with fan): 165 mm
- Width (with fan): 150 mm
- Depth (with fan): 161 mm
- Weight (without fan): 980 g
- Weight (with fan/s): 1320 g
Materials
Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating
Cooler Specifications
Scope of delivery
- 2x NF-A15 PWM premium fan
- 2x NA-RC7 Low-Noise Adaptor (L.N.A)
- NA-YC1 4-pin PWM y-cable
- NT-H1 high-grade thermal compound
- SecuFirm2 mounting kit
- Noctua Metal Case-Badge
Fan compatibility
140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25
6 heatpipe dual tower design
As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NH-D15 | NH-D15S | NH-D15 SE-AM4 | NH-D15 chromax.black | NH-D15S chromax.black | |
| LGA2066, LGA2011-0 & LGA2011-3 | ✓ | ✓ | with NM-i20xx | ✓ | ✓ |
| LGA1700 | ✓ | ✓ | with NM-i17xx-MP83 | ✓ | ✓ |
| LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) | ✓ | ✓ | with NM-i115x-1200 | ✓ | ✓ |
| LGA775 & LGA1366 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 | with NM-I3 |
| Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 | X | X | X | X | X |
| Xeon LGA3647 | X | X | X | X | X |
| Xeon LGA4189 | X | X | X | X | X |
| AM5 | ✓ | ✓ | ✓ | ✓ | ✓ |
| AM4 | ✓ | ✓ | ✓ | ✓ | ✓ |
| sTRx4, sWRX8, TR4, SP3 | X | X | X | X | X |
Related products
