Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(274 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • LöRcH

    > 24 hour

    Fazit unten!

  • Sierra Kassulke III

    > 24 hour

    If you have the space in your case, the D15 is the best for most people. The only downside is its extreme size. I rolled the dice and bought it for my Cosair Carbide Spec-04 case even though officially it doesnt fit. It juuuuust fits and Im extremely happy with it.

  • Ben C

    > 24 hour

    I used this CPU cooler in my desktop as i was replacing the stock cooler the coolers mounting instructions and kit was excellent and i had everything installed in about 20minutes it also includes enough thermal paste for about 20 attempts at installing the cooler Also Noctuas support was top notch and they responded to my questions within 2 days.

  • J. Paylor

    > 24 hour

    Very quiet. Keeps CPU surprisingly cool.

  • Will64

    > 24 hour

    rien a redire sur la qualité, lexpedition du produit

  • Matthew

    > 24 hour

    Replaced Corsair H100 with this cooler (It was getting pretty long in the tooth and developed a squeak in the pump). A bit warmer with idle temps but when under load actually cools better than the H100. My PC is set up in a CM HAF XB its not really meant to be a quiet rig, its more like a test bench type design, very airy very open.. despite that, replacing the H100 with this actually reduced my noise levels. I didnt install the low noise adapter as its not needed.. unless youre going for completely inaudible. Would recommend for any application as long as you can fit it in your case. On my particular motherboard one of the cooling towers actually sits above one of my RAM DIMM slots but if youll notice there is a cutout at the bottom of the towers that actually allows quite a tall heat spreader on your ram. Im using corsair vengeance and there is room to spare, to give you an idea. If youre concerned with compatibility be sure to check out the notcua website, theyve got a pretty exhaustive compatibility chart that you can reference to make sure it works with your motherboard. Also check the specs for your case, there will usually be a metric for CPU Cooler Clearance or something along those lines and just bounce that off the size of the NH-D15.

  • QuoVadis

    > 24 hour

    Un excellent ventirad même si sa couleur est discutable. Pas de bruit et edcellente dissipation sur un i9 overclocké.

  • Cutter J. Flywheel

    > 24 hour

    Switched back to Noctua after too many issues with AIOs. Forgot how good air cooling can be. Running 4.7GHz all core OC on i7=8700k @ 1.2v (poor quality VRM) / 3600 MHz XMP achieving 32° C no load and 55° C full load (no AVX offset). Quick and easy install!

  • Mickaël

    > 24 hour

    Excellent, emballage parfait, impressionnant et imposant mais sinstalle aisément, que ce soit pour un processeur AMD ou un INTEL il suffit dutiliser le sachet adéquat. Ma config est une carte mère Asus Maximus IX Hero, processeur i7 7700k, ventirad NoctuaNH-D15, 4 barrettes Hyper X predator, alimentation SMART PRO 750W RGB 80Plus, tour Termalteck. Merci Amazon pour son sérieux et sa rapidité.

  • Isaias Smith

    > 24 hour

    enough silent while running at maximum RPM,

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Super Lucky Shop
Super Lucky Shop
( 771 reviews )
Visit Store
Top Selling Products