Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • benjamin

    > 3 day

    I was so impressed with this CPU Cooler that I couldnt help get a second one for my next PC build for my sons PC I am building.

  • Ilya Nemtsev

    > 3 day

    Fantastic cooler! I replaced Corsair H115i with this cooler and my gaming temps went down from 55-58C to 44-46C. Under prime95 temps hovered around 55-58C. CPU 6700K @ 4.2GHZ. The installation is a bit laborious, probably equally laborious as installing the H115i, but the instructions were clear and I had no problems. Size of this thing is pretty crazy (check out the pics), Corsair 750D fits no problem, but I would worry if I had a standard mid tower, better to check compatibility online. Noise is lower than H115i by about 25%. I am very satisfied with this coolers performance, from the packaging to the cooler itself, quality is felt throughout.

  • Riccardo Brambilla

    Greater than one week

    Dissipatore enorme, ma facilissimo da montare, istruzioni facili e nella scatole è presente tutto loccorente per il montaggio imballato in modo ordinato e certosino, devo dire poi che sono rimasto sorpreso delle temperature di esercizio del processore che con una temperatura esterna di 35° stava a 27° in idle, e sotto sforzo a 37-38°, veramente magnifico.

  • D.R. Hawn

    > 3 day

    I had a Corsair liquid cooler on my system, and the pump went out. Rather than use another liquid system, I bought this so that if a fan dies, I dont have to replace the entire cooling system. With the Corsair, my CPU temps were in the 65 - 70C range. With this, they dropped to 55-60. Running both fans, I can barely hear it, and it sits right next to me. Make sure your case and MoBo can take the size of this, as it is quite large. Very happy with the purchase, though different colored fans would have been nice.

  • Eduard

    > 3 day

    I think its a great cooler,I have an i5 4690kplaying games like crysis 3 and new games too far cry 4 heroes of might&magic6 etc on full hd on very high or ultra settings and the processor didnt went above40 c degrees

  • Doge

    Greater than one week

    As the title says, this this is great. I couldnt fit the second fan in to my case, so I just have the one in the middle and it still does wonders! I get around 30°C - 37°C idle and around 60°C under load. The temps almost never go above 70°C, and again thats only with one of the fans on. I recommend this cooler to anyone.

  • clint

    > 3 day

    I use to use liquid cooler, now I decided to look for something more reliable, and this is it! While gaming on ultra graphics, running a few background apps this thing keeps my cpu in mid 50s. It is an amazing cooler!

  • J. Kirk

    > 3 day

    My idle temp on my overclocked 2600k @ 4.5ghz went from 55c to 30c.

  • Gunner Prohaska

    > 3 day

    La única pega que se le podría poner es que podría ser un poco más barato. Por lo demás, desempeño o sonoridad muy bien.

  • Noah Rinehart

    > 3 day

    As soon as I picked up the box, I knew something was wrong since it sounded like there was loose change inside. After opening and taking out the heatsink, I noticed there were fingerprints on the top of the heatsink. Additionally, some pages of the instructions were missing, specifically the AM4 socket instructions that I needed to follow for my install. After going through the effort of tracking down a PDF of the manual, and screwing all the mounts on, I finally realized that there was another missing item: the thermal paste. I would recommend buying this product NOT from Amazon, but from a local seller if you dont want to go through a similar situation.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
5G Research Institute
5G Research Institute
( 1458 reviews )
Visit Store
Top Selling Products