Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

Im getting better frames/cb scores with this than I was getting with a Corsair H100i. Definitely worth it. Paired with my Meshify C it’s perfect.

This is an expensive aircooler, but theres a reason for it. Noctua makes the top-of-the-line coolers and fans, and you will get every dollars worth out of this cooler, especially if you plan to overclock without a AIO watercooler or custom water loop.

The best coolers you can get for your cpu.

Hes a big boy, cools well, better than my older water cooling loop. A genuine surprise, completely silent.

You really dont get much better air cooling than this, and its as good as quite a few water coolers.

Works great so far. It really is huge so beware of the dimensions of your case. Other than size, install was easy with two brackets in the back and just four screws on the front. In case anyone is wondering, it fit in my Corsair Graphite Series 230T. It’s kept my i7 8700k cool.

Noctua NH-D15. Works perfectly, reduced the full load temp of a 2700x by +-20C under full load compared to Prism Wraith cooler, and is very quiet. Came with mounting brackets for Intel and AMD. Be aware that it does not come with backplate for AMD (your motherboard should have it). Very pleased with product, although it is very expensive for what it is. Be sure to check for motherboard, RAM clearance and case compatibility before purchasing, it is Huge. Had a bit of trouble mounting it on AM4 socket, you must screw in both screws at the exact same time, otherwise it will tilt and will not screw down properly. Thermal paste and screwdriver provided in box is a plus!

works better than most water coolers

This is one heck of an upgrade. Its big, its quite, and it works. and it will continue to work for a decent amount of time. It comes with compatibility for current and future sockets. It may block your first expansion port depending on how close it is to the CPU socket. Also, if your case isnt big, like Cooler Master HAF big, it might not fit. its different than the NH-D14 in the fact that its wider and if you chose to use 1 center fan instead of both, you can fit high profile RAM. If you use both, you will need to use standard profile or low to make it fit. I personally used IC Diamond with this rather than the NT-H1 thermal compound that it came with. Its a personal choice, (ICD will give about 1 degree Celsius better than NT-H1 and will scratch the wonderful mirror finish) but i digress.

its eally amaizing i was used corsair h100i v2 and its dead after 9 month then i found this amaizing product i buy it and i over clock my cpu to 4.6 and 1.35volt the temp at full load in temp room never go abofe 60 its really amazing my cpu is i7 6700k