Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
sysyx
Greater than one weekTrès silencieux
-
Average Joe
> 3 dayNoctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
Jarret Reichel V
16-11-2024I used this to silence a Fostex D2424LV multitrack recorder whose original fan made a painful noise in a quiet home studio. I was prepared to do some modifications but this fit perfectly in the internal fan slot and no soldering or cable splicing necessary, but I wouldve been happier with an option without the kitchen sink - the amount of adapters and cables supplied was a bit excessive for my purposes.
-
John Snell
> 3 dayI bought this to use for cooling on the extruder of my 3d printer (Monoprice Maker Select v2). Have been using now for several months (well over 200 hours of use) with no issues at all. Nice and quiet!
-
Joe Sams
> 3 dayI replaced the fan on my 3d printer with this. It works fine... bit quiter than the OEM on the printer.
-
NigelCHP
13-11-2024Used to replace noisy fan in Creality CR-10 3D printers extruder. Can hardly tell the fan is running without putting my ear right next to it. Premium packaging and lots of accessories, most of which I didnt use, but Ive no doubt theyll be useful at some point!
-
WillTech
> 3 dayTemps seams fine, quite easy instalation (altho I soldered a custom lenght cable for it) I was scared because this psu wont start with jumper cables, only with a good tester or full mobo/pc plugged in!
-
Marc
> 3 dayHabe diesen Lüfter für meinen 3D Drucker gekauft.
-
Nels Connelly
> 3 dayjen ai déjà acheté plusieurs et jen suis satisfait.
-
Andreas R.
> 3 dayIch habe mit diesen Lüftern in mehreren Switches eines namhaften Hersteller den ohrenbetäubenden Lärm beendet, der da veranstaltet wurde. Die Dinger sind wirklich so leise, das ich 2 mal hinhören musste, ob die überhaupt laufen. Lieferumfang mit allerelei Zubehör und Steckern, und Adaptern und sonst was....Vollausstattung sozusagen. Absolut klare Kaufempfehlung
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth Commutation Drivetechnology and Noctua’s reference class SSO2 bearings ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and a Low-Noise Adaptor and OmniJoin Adaptor Set, the NF-A4x10 is a premium choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 BearingThe NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. |
Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.
|
|
|
|
|
|---|---|---|---|---|
| NF-A4x10 PWM | NF-A4x10 FLX | NF-A4x10 5V PWM | NF-A4x10 5V | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin |
| Voltage | 12 V | 12 V | 5V | 5V |
| RPM | Max: 5000 / Min: 1000 | 4500 | Max: 5000 / Min: 1000 | 4500 |
| RPM with L.N.A. | 3700 | 3700 | - | - |
| Acoustical Noise | 19,6 dB(A) | 17,9 dB(A) | 19,6 dB(A) | 17,9 dB(A) |
| Acoustical Noise with L.N.A. | 12,9 dB(A) | 12,9 dB(A) | - | - |
| Size | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige |
Related products
