Noctua NF-A4x10 FLX, Premium Quiet Fan, 3-Pin (40x10mm, Brown)
-
Luca Lorenzini
> 3 dayUsata per raffreddare un estrusore di stampa. funziona perfettamente, ma me laspettavo più silenziosa.
-
Käufer
> 3 dayVerwende nur noch diese Lüfter, sie sind wirklich hochwertig und nahezu unhörbar.
-
Abod68
> 3 dayJai rendu mon imprimante 3d silencieuse mais jentendais toujours les ventilateurs... Maintenant je regarde régulièrement si elle tourne encore parce que je ne lentend plus du tout... Pour le moment je nai pas eu de soucis de surchauffe ni du hotend ni de lalimentation ou de la carte.
-
aniello
> 3 dayPerfetta in tutto e per tutto,nulla da eccepire,ne prenderò altre di sicuro
-
David Lang
> 3 dayUsing it for an atmospheric monitoring station. i.e. forced ventilation of the air quality sensors.
-
androidiano78
> 3 dayNOCTUA dice tutto
-
rick
16-11-2024Its much quieter and smoother than the stock fan it replaced.
-
LB
Greater than one weekDies ist ein sehr leiser Lüfter!!!
-
Rose
> 3 dayGot these for my bfs 3D printer. He said it helps a lot with the sound.
-
Harald Groeger
> 3 dayHabe damit den unglaublich lauten und vibrierenden Hotend-Lüfter des Anycubic i3 Mega ersetzt. Ein unglaublicher Unterschied! Einzige Warnung: Im Anycubic i3 Mega sind keine standard Lüfteranschlüsse verbaut, womit man sich einen Adapter basteln muss (in meinem Fall mit F-M Jumper Kabeln erledigt).
Featuring advanced aerodynamic design measures such as Flow Acceleration Channels and Noctua’s AAO frame, the NF-A4x10 FLX is a highly optimised, premium quality quiet fan in 40x10mm size. Smooth Commutation Drivetechnology and Noctua’s reference class SSO2 bearings ensure superb running smoothness and excellent long-term stability. Topped off with modular cabling and a Low-Noise Adaptor and OmniJoin Adaptor Set, the NF-A4x10 is a premium choice for the highest demands.
AAO frame
Noctua"s AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua"s proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan"s performance/noise efficiency.
|
|
|
|
|
|---|---|---|---|
Flow Acceleration ChannelsThe NF-A4x10 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise. |
SSO2 BearingThe NF-A4x10 features the further optimised second generation of Noctua"s renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
Integrated Anti-Vibration PadsIntegrated Anti-Vibration Pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard mounting systems and fan clips used on heatsinks. |
Inner Surface MicrostructuresWith the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
Reduced motor hub size
Thanks to its streamlined, compact motor design, the NF-A4x10"s motor hub is smaller than with conventional 4cm fans. This allows for more blade surface area and thus contributes to the NF-A4x10"s superior airflow and pressure performance.
|
|
|
|
|
|---|---|---|---|---|
| NF-A4x10 PWM | NF-A4x10 FLX | NF-A4x10 5V PWM | NF-A4x10 5V | |
| Connector | 4-pin PWM | 3-pin | 4-pin PWM | 3-pin |
| Voltage | 12 V | 12 V | 5V | 5V |
| RPM | Max: 5000 / Min: 1000 | 4500 | Max: 5000 / Min: 1000 | 4500 |
| RPM with L.N.A. | 3700 | 3700 | - | - |
| Acoustical Noise | 19,6 dB(A) | 17,9 dB(A) | 19,6 dB(A) | 17,9 dB(A) |
| Acoustical Noise with L.N.A. | 12,9 dB(A) | 12,9 dB(A) | - | - |
| Size | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm | 40x40x10 mm |
| Colour | Brown & Beige | Brown & Beige | Brown & Beige | Brown & Beige |
Related products
