Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Delphine Sauer
> 3 dayQuick delivery and does the job :)
-
Zach Miller
> 3 dayI always recommend this thermal paste to everyone. It performs better than any other. Don’t cheap out on this if you have a nice pc.
-
gt_jjax
Greater than one weekArctic Silver is the only brand I use
-
Jess
Greater than one weekAlways used Arctic Silver for years its great stuff.
-
Michael
> 3 dayWish it could have been a two day but other then that great stuff
-
Aaron Parks
> 3 dayNothing,
-
Average Joe the consumer
> 3 dayPurchased a new tube because the one I previously had was 2 years old and was no longer usable.
-
Richmond Cabrera
> 3 dayLove it
-
G. Flippo
> 3 dayItem as described. Applied easily and worked as expected.
-
Aceman
> 3 dayAbsolutely Fantastic thermal paste, temperature went down about 5 degrees compared to the pre-applied thermal paste that AMD has.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
