Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Paul John Pascual
> 3 dayLower temperature for my gpu and cpu. This amount can be used over and over again for. Used it 5 times already and still got more juice for another 4 applications. Temp from 80°c to 65°c full load! Thats what a quality thermal paste does.
-
Ahlam
> 3 dayThis does not work with inspiron Dell laptop
-
Treva Daugherty
> 3 dayGreat product
-
bloops
Greater than one weekusing this to fix my launch PS3 YLOD. ;]
-
Dirk M. Tyssen
> 3 dayVery good! PS4 is running like a champ again! Thanks!
-
aholic
Greater than one weekUsed on Xeon, Intel I7, laptop graphic chips and never ever had a problem. Clean heatsink and chip with alcohol very carefully, apply a pea size of this on center of chip. Good to go.
-
Moe
> 3 dayGood but tiny
-
juan david pineda
> 3 dayBuen producto solo que es difícil de esparcir al gusto porque es muy pegachento
-
Siyuan Yao
> 3 dayHigh efficiency heat exchange
-
Andrew Cayer
Greater than one weekI had a much older pre-built that was running around 79 C. The thermal paste on that was crumbling and wasnt even spread evenly across the processor. I got it off and applied this stuff. Now that it is evenly spread, it dropped the temperature down to about 65 C. Pretty impressive
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
