Comet CTC-50M CTC50M CTC 50M CTC/50M Original Window Feed-Thru Jumper W/UHF Female (SO-239) Connectors at Each End

(1179 reviews)

Price
$49.75

Quantity
(10000 available )

Total Price
Share
90 Ratings
74
10
3
1
2
Reviews
  • C. J. D.

    > 3 day

    Works great! Using it for a scanner antenna and getting that antenna outside made a world of difference, I don’t see any notice loss with this product.

  • K. Johnson

    Greater than one week

    Modern windows are tight with no room in the slides. This would not allow my window to close with this either in the side or at the bottom. Great idea, but it didnt work for me.

  • viemaster

    > 3 day

    Seemed a little high but decided to give it a try. Worked well in my application. Window is closed and locked. May get another.

  • Maverick

    > 3 day

    When I ordered this, I could find no mention that these feed-through jumpers worked with newer horizontal sliding vinyl double-pane windows. Being very energy efficient, I was concerned our 3 year old windows would seal too tightly for this jumper to work. But I can now tell you, it worked for our windows and very well. I purchased two of these jumpers, one for HF and the other for 2M/440. The cables are one on top of the other and Ive seen no interference between the two signals. This jumper solved my problem of not wanting to drill through our stucco walls. Now I can run both radios (HF & Dual-Band) with the window tightly closed.

  • Kitty

    > 3 day

    If you cant go to the next level of having coax through walls to elevate your antenna, then this is the trick. Been using it about a month and really vastly improved transmit and receive on my Baofeng hand-held. Using now on my Kenwood TM-D710G and find it does well.

  • GoBlue1960

    > 3 day

    Great product if you dont want to drill holes in your wall.+

  • Max Headspace

    > 3 day

    Windows in our leased house are the swing-out variety, so the usual slide-window pass-throughs dont fit. I eventually bought three of these, one for HF, one for VHF and one for UHF. Insertion loss is better than I expected, and SWR is acceptable in all three bands. The only downside is that being as thin as they are theyre not the sturdiest. Best used in locations where you can put them in and then dont open/close the windows a lot.

  • rolland browning

    > 3 day

    for 50 bucks you get a window passthrough with minimal power loss and you do not have to drill holes in your walls. Update after one year the cable is separating. It still works though

  • KB3MTU

    > 3 day

    Love it. Makes it work for HOA!

  • Bernt Andersson

    > 3 day

    Works as advertised.

When drilling through the wall is forbidden, or if there is no way to make a sufficient hole for your coaxial cable, then a Comet Window Feed-Thru Jumper may be the problem solver that you need! Comet Window Feed-Thru Jumpers are flexible, 50 ohm, flat feedline assemblies with SO-239 UHF female connectors at each end. They are used for routing RF through a window frame without drilling holes in the wall or leaving a window/door open for the coax cable or connectors. These window-gap jumpers are almost 16 in. long and are made from copper-clad steel and PET plastic to allow for a low power transfer of RF with a nominal loss of only 0.5 dB up to 500 MHz, and they are useable up to 1300 MHz! Whether you route it through a sliding door or window, you can close the door or window securely without damaging the coax!

Related products

Shop
( 1694 reviews )
Top Selling Products