Canon Pixma iP2600 Photo Inkjet Printer (2435B002)

Bought the printer at walmart, am on my second black cartridge. Turned the printer on to do some printing and got seven flashes on the amber light. Looked in the manual and read that the cartridge was not properly installed. So far, I reinstalled it about fifty times, to no avail. I still get the same message, can anybody offer any help ?

Canon tends to make good products, and this is no exception. A very good printer for the price.

This printer prints quicker than the printer it replaced, however, when it pulls paper from the tray, its quite noisy. The print quallity of color photos are not as good as expected. For a low-price printer, this one is OK.

Dull photos? Ha! More like best-kept secret. $30 is a STEAL for print quality at this level. In 10 minutes anyone half-serious about photography or digital color can have this little thing churning out some decidedly nice looking output on a wide variety of stock. Think color space. Then think luminance. Spend 10 minutes calibrating this thing and, erm, holy cow. Bright, screen-true prints with bandless gradients and a dynamic range thatll handle almost anything the 8-bit world can throw at it. 30 bucks? Two $20 (retail) cartridges? Are you kidding me? MY PICTURES ARE DULL AND WASHED-OUT! So adjust your printer. This basic calibration process should be performed on any new printer if youre serious about image quality. You need to make your printouts look as much as possible like the corresponding images on your monitor. Even if youre not obsessive about the subject, they should still come pretty close (assuming the device is for general use or generic proofing). A. In the driver settings dialog, on the Main tab, change Color/Intensity to manual, and click the Set button. This brings up a new dialog. B. Skip immediately to the Matching tab, and change the settings as appropriate. You need to learn about color spaces if youre serious about digital images, but most likely your actual display is set to a profile called sRGB, which corresponds to ICM->Standard on this driver settings screen. C. Go back to the color adjustment tab. Now youre going to start tweaking the machine to compensate directly for the poor-quality output. Youre going to make changes, and then print out a calibration image to see if youve hit your mark. You can download calibration images on the web, which are often collages that include color gradients, color charts, skin tones, nature scenes, lighting variations, grayscale images, etc. Or you can make a collage from your own images. Just make sure it covers the subjects and attributes youll be printing most. Usually if I can hit skin tones, everything else falls into place. REMEMBER: The goal is not to get appealing skin tones. The goal is to get skin tones that match what you see on your monitor. Also, remember that your monitor is a source of light, and a photo is not. A printout needs to be lit sufficiently to make a fair comparison with its digital counterpart. D. Start with the Intensity and the Contrast sliders. Move them SLIGHTLY to the right. I started at 4, printed a test, and then went in increments of 2 before finally arriving at an optimal value of 8 for both settings. You may get better results adjusting them more or less, in sync or not, whatever. Depends on how your monitors calibrated, among other things. E. Thats PROBABLY all youll have to do. But if theres a printout problem thats truly a question of a colors ***hue*** (which shouldnt occur if youve matched the profiles) and not its ***luminance***, you can adjust the ink volume CMY sliders at the top. I personally didnt have to do this. BUT THE INK RUNS OUT TOO FAST! 1. The 30/31 cartridges that came with your printer are fully compatible with the PG40 and the PG41. Just like the box says. And your Quick Start Guide. And your manual. So what? Well, the 40 and the 41 give somewhere between twice and three times the yield of the 30 and the 31. And they cost the same. Go figure. 2. If you want a high-volume printer, you bought the wrong machine. The 30 bucks shouldve been a hint. ;-) MY SHEETS FALL ALL OVER THE FLOOR! Umm, swing the little arm out.

Works perfectly. Excellent response.

While Id never try to use such a printer for work use, this is a perfect printer for the home and home office that prints a couple of pages per day. The price is low, and the quality can be adjusted for reasonably high DPI. Photos, once the beads have settled into the photo paper, leave no streaks and it has an interface you can run to fine tune print head alignment. As for ink, you know what youre getting. Of course these things go through ink. Im still on my original cartridges, and on the 2nd fill for each one. Get a refill kit (I got 4 oz of each color and 8 oz black) and call it good. Use a tool called IPTool.exe (I use version 1.1.5) to reset the color counters of the cartridge. If you dried the cartridge out (or one color out) you can still refill it, and then run the deep head cleaning from the native software to get it working again. IPTool.exe can reset the software counter for that color on the cartridge, and youre back in business. Ive basically spent about $55 for the printer, and $39 for a refill kit that may last me the life of the printer if the jets hold out. So far the color cartridge went dry once, and running back to back deep-cleans fixed everything.

Ive had mine for a least a decade. Im on Windows 11 now. No problems.

I bought this printer in 2009 before college, and boy did I love it! I still do love it, and I plan to take it with me to grad school. I am sure in the past 5 years of use, this printer did stutter and jam several times... but for the most part, my impression of my printer is a positive one. I got this for less than $100, so I think I got this for a bargain. I guess the price went up. This printer is not the fastest, but it got the job done. You have to manually manipulate the papers and printing settings to get double-sided printing (which I made mistakes with several times). The printing quality was very much sufficient for essays and lecture notes with images. I am too cheap to use expensive ink to print photos with this, but I am sure people liked it for its intended purpose. It is loud when it prints, so if you live in a 3-person, tiny dorm room like I did freshman year, late-night printing would be a bit rude. Love this printer, and i hope I can keep using it!

Great little printer for the money, but the cartridges do not last very long. They offer larger cartridges, but theyre pretty expensive too. When I went back to the store to get more ink cartridges, I realized that buying a new printer (which comes with cartridges and a small pack of photo paper) was about $4 less than buying the replacement cartridges. I felt a little guilty since its such a waste of resources (environmentally speaking), but thats Canons stupid fault for pricing things the way they have. Do they really think were not going to notice that the replacement ink cartridges cost more than we paid for the printer? Corporate America doing what it does best...wasting money. Had the two cartridges cost $25, I would have saved myself five bucks and gone on with my life. So I reluctantly bought another printer for $30 instead of paying $34 for the two little replacement cartridges. How could I not? That said, Im not the type to keep buying printers and putting them in closet or throwing them in the dumpster, so Ill be looking for an alternative soon, preferably from another company...but for the meanwhile, this one does the job just fine. Its just the principle that puts me off. Everything about the printer is great...looks awesome sitting next to my iMac too.

Ive only used this printer a couple of times, but so far I love it. I love the overall appearance of the printer. The ink cartridges were a little hard to get in the first time, I almost gave up. Print quality is better than the previous printer I had. Very easy to set up. It does take awhile for it to begin printing documents, I wait almost a minute before it begins to print. Overall for the price and quality of printing, I would give this computer a B.