XLNT TECH Engraving Double Color Sheet (7 x 11“ x .040”, 12 Pieces & 12 Colors) for Interior Signs, Badges.
-
Andy Canable
Greater than one weekHavent got to use them yet but they look fine!
-
Frank Epstein
> 3 dayI paid for .06 and got .04 thickness. Item Not As Described. returned. They are, however, easy to to do the score and bend to snap into smaller pieces. take a flat edge like a metal ruler, carefully gently slide the edge of a box cutter to score, or use something like a manual slide the blade thing with mounted blade, about 10 times to make a groove, bend it against an edge to break, snapping into smaller pieces, then use a knife to trim the edges if any bits are sticking out.
-
Rob Kilgallon
> 3 dayCO2 works best for cutting, diode works best for engraving, FYSA.
-
James Brewer
> 3 dayWorks well with my 7w diode laser at 15% power. Easy to cut with a utility knife and a straight edge.
-
Stepinwolf
> 3 dayThe product has a thin white layer over a thick blue layer, so the engraving involves removing the white layer and exposing the blue. I had a lot of trouble with getting the power settings to accomplish that.
-
DHuffman
> 3 dayDelivered on time, worked as expected.
-
Robert Adams
> 3 dayAll the colors show a color layer, a white layer and then another color layer. They have a very very thin color layer, then a thick .039 white layer. I feel that the ad by the depicted display is out and out wrong. I will use them but, they are not what I ordered per ad as shown.
-
creighta
> 3 dayDO NOT BUY!! Not a laser friendly product as advertised. In the lowest power settings, my 40w burns this material and the fumes smell like PVC which is not safe for laser operation.
-
Steven Ferguson
> 3 dayI have laser engraved and CNC engraved this product. Both options worked well. The quality is very similar to the more expensive brother and visually there is little difference. I will reorder this product. It is a good option for smaller quantities of engraving plastic.
-
Jaydon VonRueden MD
> 3 dayGreat material, but mine came at 0.043” instead of advertised 0.060”. Measure and setup CNC machine properly.
