WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
REBECCA
> 3 daySo far so good. However, it has to within view (straight) of the unit you are trying to amplify.
-
K.Bialkowski
> 3 daySchneller Versand, Schnelle LAN Übertragung! Zu empfehlen !
-
JOYCE
> 3 dayWorks very well, extended current wireless to half of the house: 2 bars to 5 bars.Easy set up via web site.Highly recommend tried 2 other brands which failed.
-
JERRY
> 3 dayIn Extender mode it allows you to use the ethernet port for devices that dont support WiFi. It also has the ability to be a full Access Point. This would be great for travel or as a backup but I wouldnt use it for normal operation.
-
qttggw
Greater than one weekIt took 2 minutes to set up and I went from 0-1 bar to 5 bars on my second floor. Very small and easy to use..
-
JEREMY
> 3 dayI was a little apprehensive about this product at first, but this Range Extender works really well. I had an issue with receiving our Wi-Fi upstairs (Wi-Fi) located downstairs and this product solved my problem.
-
MARY
Greater than one weekWorks perfectly, the WPA setup is fairly easy to do. A bit more work with the browser setup but if you take your time will not be a problem.
-
Aldo
15-11-2024Kabel ist nach Jahren immernoch ganz und liefert volle Leistung. Wer Internet über längere Distanzen in Räumen benötigt ist hier gut aufgehoben!
-
Anion
Greater than one weekWirklich ein gutes und auch langes Kabel. Bei mir laufen meine vollen 50k durch und ich kann es ohne Probleme einmal quer durch die Wohnung legen. Es sieht auch sehr hochwertig aus und nicht nach billiger China Produktion
-
MARY
> 3 dayMy router is in the living room and wifi would be super spotty in the bedroom but with this range extender it is working very great . Setup was very pretty easy. Well see how it goes. pretty easy setup and works great. According to a speed test, quadrupled the download speed, and it seems it. Was getting drops and erratic wifi from the existing router. This unit is halfway between the two and after two months, hasnt dropped yet.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
