WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
KEITH
> 3 dayWe were having a lot of issues with out ISP provided modem/wifi router. Ethernet was fine, but wifi was always problematic. I ended up getting this to use as an access point and wow does it work. My phone speed went from under 20Mbps to 90mbps!! No more interruptions or interference either.
-
JEREMY
> 3 dayunit was super easy to setup and works great. Range is very good and has very good passthru.excellent product easy to use if you also have the TP-Link wireless router
-
Luisa
> 3 dayendlich mal ein Kabel das lang genug ist! schnelle Lieferung, alles lief unkompliziert ab, ich hoffe das mein Kaninchen sich diesmal nicht so schnell wieder dran zu schaffen macht :D
-
CHRISTINE
> 3 daywe could get a steady connection but all to often no Internet. The distance from the router and wifi to our media center is only about 40 ft but there is a lot of ducting, wiring and other obstacles in between. The device works like a charm. The signal strength is 100% at the media center. Prior to the device we could get 35% at best. The range extender comes with clear instructions in a booklet that I followed and in less than 5 minutes we were up and viewing. Price, performance, clear instructions and ease of installation, top notch.
-
Menaka Mahalingam
> 3 dayEasy to set up. Works perfectly for a month now with no issue
-
Solarreinigung
> 3 dayHabe die LANkabel in verschiedenen Längen gekauft und sie sind wirklich einwandfrei.Die Stecker sind gut gearbeitet und das Kabel weich und biegsam.
-
Philipp E.
> 3 dayHohe Flexibilität, guter Clips am Stecker
-
JEREMY
Greater than one weekExcellent range extender, giving me excellent reception where I used to get good rating reception. I am happy with this machine.
-
BENJAMIN
> 3 dayI was looking for something quick and easy to boost my wifi because my bedroom was a dead zone. This was cheap but it works great.
-
sheron windsor
> 3 dayworked well in a 3 bed 2 story home to extend wifi from 1st floor up to the 2nd floor.So far, so good. It certainly extends the signal throught the house.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
