WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
Herr Müller
Greater than one weekEs ist sehr günstig, es sieht gut aus und es funktioniert auch einwandfrei. Ein super Kabel für alle Fälle. TOP!
-
S. J.
> 3 dayFunktionieren toll.
-
Eddie
> 3 dayWie beschrieben alles bestens - Qualität für den Preis ist mehr als O.K. - hab mir eigenltich weniger erwartet - sehr empfehlenswert
-
JOYCE
> 3 dayMy base router has a speed of 114 Mbps and the extender wifi speed was 42 Mbps. So happy with this unit and the best part is I only need to use one unit for the whole house.
-
PATRICIA
> 3 dayI was a bit surprised how easy install was after reading comments a few viewers were having. Two things to point out..... 1 make sure you sync all devices to this wifi signal while it is still plugged into outlet near router before moving it to area of weak signal.. i missed this step in the instructions and had to reset device and try a second time. 2. use laptop or pc to be first setup device ( i tried both ipads first and couldnt get it to work ) once setting up on PC all devices including 2 ipads iphone and firestick worked like a charm!! I have a consistent full 5 bars signal now in my office where I once had 2 to 3 !!
-
PATRICIA
> 3 daySeems to get service interruption quite frequently, but when it does work, it does a great job of extending our wifi coverage throughout the rest of our tiny house. Really best pretty easy to install . I watch Netflix with no laggs but it laggs on my Playstation 4 is ok though it works with my Netflix really great .
-
KIMBERLY
> 3 dayAfter carefully following the installation instruction and checking my connection near the extender, I found no noticeable improvement in signal strength or quality. Couldnt believe how pretty easy it was to set up. Pretty much plug and play. The extender found my network and is working perfectly!
-
CHRISTINE
> 3 dayDid a wonderful job of extending my home Wi-Fi coverage! Setup was a breeze; did not require cables or the packaged CD software.
-
JERRY
> 3 dayConnected easily to router. Router is downstairs at one end of house. Plugged extender into opposite end of house on upstairs level and reception is excellent.
-
JOYCE
> 3 dayInstallation could not be any simpler as 3 steps--plug in, press WPS button on router, then push large circle button on TP. Done.Filled in dead zone perfectly.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
