Uniden BC-UTGC GPS USB Cable for use with BCD325P2 Handheld TrunkTracker V Scanner, SDS100 True I/Q Digital Handheld Scanner and BC-GPSK Serial GPS Receiver

Plug and play set the baud rate to 4800 and let the GPS communicate with the scanner. Works seamlessly.

No dislikes, cable does exactly what I was expecting.

Using one of these late model scanners without a GPS makes the scanner worthless without extensive programming. With the GPS and the connecting cable, you can ride from coast to coast and the scanner will change frequencies as you drive along. By all means, use a GPS.

Sí muy bueno

Ok

Worked for about a month, then started failing and may have caused the control board in my radio to fail. Maybe just a bad unit, but cant recommend at this point. Problem started with low serial bus voltage message while in use. Disconnected GPS puck and message still there. Figured it out too late to save the $800 (after upgrades) radio.

Worked great for 2 weeks, now it constsntly says low usb bus voltage every minute or two....

Works great with my SDS100. Just plug and play and youre off and running with location-based scanning. I took a trip from Phoenix to Colorado Springs and never had to touch the scanner.

Works fine.

Works perfectly!