Uniden BC-UTGC GPS USB Cable for use with BCD325P2 Handheld TrunkTracker V Scanner, SDS100 True I/Q Digital Handheld Scanner and BC-GPSK Serial GPS Receiver

Works great with my SDS100. Just plug and play and youre off and running with location-based scanning. I took a trip from Phoenix to Colorado Springs and never had to touch the scanner.

Not sure why this was needed. A USB cable is just as well to use. Vendor was great, delivery and return. Just don’t get the purpose of this product unless you need the round connector.

Plug and play set the baud rate to 4800 and let the GPS communicate with the scanner. Works seamlessly.

Works perfectly!

Using one of these late model scanners without a GPS makes the scanner worthless without extensive programming. With the GPS and the connecting cable, you can ride from coast to coast and the scanner will change frequencies as you drive along. By all means, use a GPS.

Perfect for use with the SDS100 as supplied. Wish the scanner cable was about 1 or even 2 feet longer though. Adding an extension causes occasional low buss voltage errors. Best no

Worked for about a month, then started failing and may have caused the control board in my radio to fail. Maybe just a bad unit, but cant recommend at this point. Problem started with low serial bus voltage message while in use. Disconnected GPS puck and message still there. Figured it out too late to save the $800 (after upgrades) radio.

No muss, no fuss. Plug and play. Works as expected.

Works fine.

Ok