TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

I have ordered this twice. Sent the first one back because of no cloth. Waited for several days to get the replacement, and still no fabric.

My first order was forgotten, either way the second one was fulfilled quickly. The resin is no good. I ended up using gorilla glue epoxy instead and it works better. Good carbon though

Company said they refunded my account and they didnt. The resin is inconsistent and a 1:1 ratio sometimes yields soft results like rubber. I dont recommend this product.

I got this for my friend and me to practice on it for a big project. So far we had a lot of fun with it.

This stuff works great, it set hard and dry by the time I checked it 24 hours later. I was worried about buying because some said it didn’t set. They had to have done it incorrectly. Period.

Really easy to use

The carbon fiber and resin combo made it easy to just mix the resin and apply. The 1:1 mixing ratio didn’t require much thought. The only thing that took a little more care was working with the carbon fiber. Cutting the carbon was easy, but the carbon fibers started to flake of fairly easily until resin was applied. It could be the carbon fiber thickness or my lack of knowledge on how to properly work with carbon fibers.

Contains more than enough material for most bike repairs. Does not include the compressive heat shrink tape. Also not that you should add hardener for the temps the item will cure in. I had to go 3-1 because of the cool conditions I was working in. 2-1 is fine when its 75*, not so much when its 65*.

This worked great. I fixed my bike easily

This product worked great for my carbon bike frame repair. I made the repair much thicker than I may have needed, because I am very concerned of the strength of the repair. This product arrived in the mail quickly. The resin was slow to cure and needed nearly two days to fully cure; but this gave me a lot of working time with wrapping the layers of carbon weave and with removal of trapped air bubbles. I suggest using very sharp scissors to cut the carbon weave thats wetted with the resin on pattern marked parchment paper; or else it will fray apart on you. I practiced on a broken carbon fishing pole before doing my bike. The bond strength and repair strength was excellent on my fishing pole test piece. The bike frame repair is holding up well so far with 300 miles of rough LA roads and my 230 lbs weight.