TRUE COMPOSITES Carbon Fiber Sheet & Epoxy Resin Kit (36 x 6 + 8oz of Epoxy) 2x2 Twill, 3K, 5.7 oz. - Carbon Fiber Fabric, Carbon Fiber Repair Kit, Kit de Lámina de Fibra de Carbono y Resina Epoxi

Worked really well to reinforce a carbon fiber lip on my car and is extremely strong. The resin cures very slowly but this allows most of the air bubbles to come out and pop leaving a smooth surface. I coated it in a UV resistant clear to ensure it would not yellow in the future.

The carbon seat stay in my Rocky Mountain Element frame had flex on it. It was only a matter of time before it cracked, a potential disaster waiting to happen. The dreadful situation was averted with this kit. I got online help at YouTube, to help mend the compromised seat stay. So far a few rides in, and it works great.

Looks easy to use

Was repairing a carbon fiber prosthetic and results were alright. I think 2 sets of hands are needed for certain projects. Held up fine but have a large working area.

Greatest product ever! My carbon fiber prosthetic foot broke, and I didnt have $2500 to buy a new one so I bought two of these for $40, and made a mold out of wood! Works Great! Saved $2500 and Im able to walk again! Definitely nothing wrong with the glue on this product!

This is my first attempt to work with carbon fiber. I broke my bike frame (I fell of a trainer... Long story) so my frame was cracked (sounds like when you are bending wood). After some research, I found that my frame was repairable, but it was expensive ($500 to $800 quotes). After daydreaming with a new bike, I felt like I should give it a try and repair the frame. I love my bike (Fuji SST 1.3) so, I set aside time and begin to sand the area, to discover there was a hole in the frame (see picture), and a crack around the entire tube. Did some research on how to repair the frame, got me some sanding papers (get the 3m 80 if you want to speed up the process) and begin my journey. Word of advice, get some single blade or an Xacto blade-like, scissors are a bad idea as this carbon sheet its very flimsy. I mixed the hardener and resin equally or 1 to 1 (It was a guesstimate). With a 1.5 brush, I start applying the epoxy and 10 minutes later I glue the carbon sheet (keep mixing the expoxy or it will bee to hard), gave it a second top coat and with a plastic bag, I squeeze it all the air and tape the bag very tightly and leave it 24 hours (air-conditioned indoor). Next morning, I unwrapped the repair (see picture of a very corrugated repair) and with an 80 grain, started sanding all that. Then with a 240 started smooth things out until I got rid of the rough edges and it was smooth. Finished up with an 800 (or could be 600) and gave it a light epoxy coat with a 1.5 brush (do not reuse the brush) and there you have it. With less than $50 I repaired a frame that looks good and will serve me well for years to come.

I used this to fix up some fairings on my motorcycle. The roll was 1’x3’ not 2’x2’ which wasn’t an issue for me but keep that in mind. If you have never used carbon fiber but feel like you can do it then your fine. Just follow the directions and give it plenty of time to cure and your good.

First time doin something like that. Turned out well.

This is not real carbon fiber. This black tarp material. Does not adhere very well nor does it qualify for finished looks. Money wasted.

Just as it was described.