Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (1 Gram)

My Predator Helios 300 (2018) i5 8300H with 1050ti was heating alot while gaming or having any task i.e. consuming more cpu ... I have never cleaned or repasted in these 3 years so i decided to do this at first i was very confused between arctic and grizzly but yeah at the end bought this and results are amazing temp drop 97 to 70 .. I recommend grizzly over arctic cause arctic works best for desktop while grizzly has high working temp range perfect for laptops .

Was getting 70+ degree temps on gpu and cpu. Post applying this, i am getting between 59-62. Really good stuff.

The only issue to me is getting just a gram of this stuff per syringe. After you take your time covering the entire IHS with a thin even coat you will instantly notice a good 4-5c difference which helps get noises a little lower because your cooling solution wont have to work as hard for the same result.

N/A

Da ich mir eine neue 360 WaKü geholt habe, habe ich mir die Kryonaut dazu geholt, da sie einfach den entscheidenden Unterschied macht, um die letzten Prozente heraus zu holen.

Im sure this stuff is pretty good and I really wanted it to work, but the only problem is its immensely hard to spread evenly on a cpu. I left it in hot water for a time, even used a hair dryer during application. But it just goes too sticky quite quickly when youre trying to spread it evenly. Temps werent great (due to unevenness) and gave up after 40min trying to re-apply. I just cleaned it off and applied some arctic 3 which spread like a charm after 2min. I think if they invented an applicator tool it may prove to be the best, but until you can its pretty pointless and would not recommend. Sorry grizzly bear.

After seeing lot of reviews and lot of customer reviews from different websites. Spent nearly 2 days to decide the thermal paste. I came up with thermal grizzly kyronaut. My ryzen 3600x was getting heated up idle temps were 55 c, so I went with this along with a coolermaster ml 360r and a cooler master td500 mesh case along with a exhaust antec spark. Cooling inside the system is brilliant. Front panel sucks air and sends it to the whole system. The top is setup with radiator 360mm with 3 rgb coolermaster fans and 1 antec spark exhaust fan. Cool air comes inn and hot air generated goes out from the back

best thermal paste i have used

There is no better non-conductive thermal compound out there. Easy to apply with either the innovative screw on rubber spatula applicator (comes with two) or with one of those tiny plastic applicator spatulas to get it spread super thin and evenly across the entire die. Ive never trusted luck to spread a pea sized dot of compound evenly. My temps dropped about 10C over the next best paste applied. The only number that matters when you are shopping for a compound is the Thermal Conductivity and Kryonaut comes in at a whopping 12.5 wm/k. Sure it costs a few dollars more, but it is worth every penny. I game on my i7 6700K overclocked to 4.6GHz at 40C with a little Artic liquid freezer 120 water cooler in near silence. The fans never need to ramp up in speed. I have overclocked the FX 4300 to 4.5GHz and dont get above 38C with a Zalman CNPS8900 and some VLP DDR. I loved my first 1.5ml tube so much (built about 6 systems off that one tube) I knew I would never use another compound so I bought the large size this time. Most coolers ship with inadequate 4 wm/k or at best 8 wm/k paste. Wipe it off and get your moneys worth by applying the best and watch your temperatures plummet. Game cooler and youll be able to leave the headphones off because you can hear whats creeping up on you instead of your cooling fans desperately trying to keep your gear cool.

Habe diese Wärmeleitpaste wegen ihrem hohen Lambda von 14,5 W/(m*K) ausgesucht und wurde nicht enttäuscht!