Thermal Grizzly Kryonaut The High Performance Thermal Paste for Cooling All Processors, Graphics Cards and Heat Sinks in Computers and Consoles (1 Gram)
-
Richard Goncalves
> 3 dayBuen Producto
-
Sayon
> 3 dayVery high quality thermal paste. Would recommend for overclocking you cpu and works well with GPU as well.
-
Mack
> 3 dayItem is easy to use, however, the quantity of usage is quiet hard to measure,
-
Elliott
> 3 dayEasy to use, wish the spreader was a tad longer. Get this over other products. Works well. Cpu dropped 13c and gpu dropped 20C + on idle. Never see over 70c with full load on cpu with a crappy single 140mm water aio. Never past 65c on gpu under full load.
-
votehart
> 3 dayNo real difference than other aftermarket paste. There is not a magic formula.
-
Hector Garcia
> 3 dayExcelente calidad a buen precio
-
Joff
> 3 dayI have used a few thermal pastes, MX4 and MX5 Arctic, Noctua and now the Grizzly and by far the best, dropped temps on my 5800x by 10c, from using the Noctua brand, CPU boosting to 4950Mhz and staying well under 80c and my 6800XT Red Devil from Max Hotspot from 90c odd to 80c
-
Hyun Woo Kim
> 3 dayChanged my thermal paste for my new Asus gaming laptop since they commonly have bad assembly from the factory. Works so much better and cooler now compared to the crap original paste coupled with new thermal pads. Highly recommended.
-
naxxfish
> 3 dayExcellent quality paste - on my own rig, shaved a good 4C off my load CPU temps on a Ryzen 5 1600 with Cooler Master MasterLiquid 240 cooler (as compared to Cooler Master Mastergel), and 1-2C on an EVGA GTX 1060 3GB (with whatever stock paste they used). It comes in a resealable pouch, which they encourage you to keep the tube in. Im not a huge fan of the spreader nozzle it comes with, as I use the grain of rice method for applying, but omitting the nozzle does no harm really.
-
Gurpreet Singh Matharoo
> 3 dayGood thermal paste, gave me 3 uses. Reapplied on my PC which had old dried paste and the temps went down by around 10 degrees.
Thermal Grizzly Kryonaut
About Kryonaut thermal grease
Kryonaut thermal grease is specifically designed to meet the rigorous demands of the overclocking community and is highly regarded as a top-performing product for critical cooling systems in industrial settings.
Technical details
- Thermal Conductivity: 12.5 W/mk
- Thermal Resistance: 0,0032 K/W
- Electrical Conductivity: 0 pS/m
- Viscosity: 120-170 Pas
- SpecificWeight: 3,7g/cm3
- Temperature: -250 °C / +350 °C
- Capacity: 1g | 1,5ml/5,55g | 3ml/11,1g | 10ml/37g
Characteristics
- designed for Overclocking
- excellent thermal conductivity
- long-lasting durability
- no curing
- no electrical conductivity
Structure is the secret
Kryonaut employs a unique structure that prevents drying out at high temperatures of up to 80°C. This design also incorporates nano-aluminum and zinc-oxide particles to enhance thermal conductivity and compensate for any irregularities in the CPU or heat sink, resulting in exceptional heat transfer.
Great compatibility
Compatible with almost all cooling solutions, including air, water, and even liquid nitrogen (up to -250°C).
Compatibilities
- PS3, PS4, PS5
- Xbox 360, One, Series S, Series X
- CPU, GPU, LEDs
- Heat dissipation fins and fans
- Laptops, Macbooks
For the true "Kryonauts" amongst the "extreme overclockers"
The term "Kryo," derived from the Greek word for "cold," is also used in the German word for "cryoengineering." This implies that the thermal grease may have been specifically designed for use in cryogenic applications.
Scope of delivery
|
|
|
|
|
|---|---|---|---|
Kryonaut thermal greaseA syringe of Thermal Grizzly Kryonaut containing 1 gram of thermal grease. |
SpatulaA spatula specifically designed to evenly spread the grease. |
Check if it is originalYou can verify the authenticity of the thermal grease by entering the code on the website. |
Bag and manualAn airtight sealable and reusable package to prevent drying out. The package also contains instructions on how to apply the thermal grease correctly. |
Related products
