OWC 2.5-Inch Drive Sled Mount for Apple Mac Pro
-
Dan Bach
> 3 dayUsed if in my 2012 Mac Pro. I purchased it to mount a full-size hard drive and it lacked the second set of screw holes to mount the drive. I ended up using gaffers tape for stability.
-
Angel Anderson MD
> 3 dayOWC does it again. A perfect solution.
-
steve o
Greater than one weekQuality aluminum bracket on par with original apple drive sleds for 3.5 fit SSD right into old drive slot. of course a 500mb/sec SSD will only get 300mb/sec in the built in slots, but good enough for some purposes where max speed isnt critical.
-
William Lindgren
> 3 dayWorks perfect.
-
Dana Fiorucci
Greater than one weekWorked great to install SSD into 2009 Mac Pro.
-
Kovalenko
> 3 dayok
-
CityStreetz
> 3 dayWorks as intended.
-
Jorge H.
> 3 dayWorks fine
-
Mack
> 3 daySimple install into my 2009 Mac Pro, looks and feels like a quality product. Shipping was quick as well.
-
Andre Scott
> 3 dayproducet is really good..serving its purpose..
OWC Mount Pro 2.5" Drive Sled for 2009-2012 Apple Mac Pro
Add any 2.5" Hard Drive or SSD to your Apple Mac Pro!
While designed with the OWC Mercury brand SSDs in mind, the OWC Mount Pro 2.5 is the easiest way to add ANY 2.5" Hard Disk Drive or Solid State Drive to your Apple Mac Pro (2009-2012 "Nehalem" & "Westmere" models).
The powder-coated aluminum and open design assists in heat dissipation while the blue color not only looks sharp, but allows you to tell at a glance which bays contain 2.5" form factor drives.
Installation is a breeze. Simply attach your 2.5" drive to the bracket using the four included hard drive mounting screws and swap with an existing 3.5" drive tray. The OWC Mount Pro 2.5 perfectly aligns the SATA connection from your 2.5" drive into the back plane SATA ports on the Mac Pro.
Note: Not for use with Mac Pro models released in 2006, 2007, or 2008
The Mount Pro is compatible with...
- Mac Pro 12-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (2.40GHz, 2.66GHz, 2.93GHz, 3.06GHz)
- Mac Pro 8-Core (Mid 2010) Model ID: MacPro5,1 (2.4GHz)
- Mac Pro 6-Core (July, 2010 / June 2012) Model ID: MacPro5,1 (3.33GHz)
- Mac Pro (Mid 2010 Quad-Core) Model ID: MacPro5,1 (2.8GHz, 3.2GHz, 3.33GHz)
- Mac Pro (Early 2009 8-Core) Model ID: MacPro4,1 (2.26GHz, 2.66GHz, 2.93GHz)
- Mac Pro (Early 2009 Quad-Core) Model ID: MacPro4,1 (2.66GHz, 2.93GHz, 3.33GHz)
For these models, we recommend using the NewerTech AdaptaDrive 2.5" to 3.5" Drive Converter Bracket
NOT COMPATIBLE: Mac Pro (Early 2008) Model ID: MacPro3,1 (2.8GHz, 3.0GHz, 3.2GHz)
NOT COMPATIBLE: Mac Pro (8-core) (April, 2007)Model ID: MacPro2,1 (3.0GHz)
NOT COMPATIBLE: Mac Pro (August, 2006) Model ID: MacPro1,1 (2.0GHz, 2.66GHz, 3.0GHz)
