Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • nope.

    > 3 day

    Garbage wouldnt fit my mobo even though it suggested it would and they refused to refund they are complete trash sellers would avoid at all costs.

  • Pádraic Brady

    > 3 day

    Replacing a stock Ryzen 2600X cooler which was just far too noisy. I had a tower cooler in a previous build but the Noctua is the best I’ve ever had. 20C temp reduction over stock cooler whether at idle or full load, maxing out at 880 RPMs on the fans. This beast may be overkill for me, but that’s fine because i bought it to control my noise levels and it’s barely audible with the CPU fully loaded!

  • Matthew

    > 3 day

    Absolutely loving it.

  • Erik

    Greater than one week

    If your system has the proper space and clearances this is the only way to go if you want to air cool your CPU. The quality is second to none and is worth every penny. Kept my 6700k very cool. Check Noctuas website for motherboard compatibility.

  • Norbert Kuphal

    Greater than one week

    Works as advertised. Havent had any problems with it so far. There is a black variant if people want to match the black colour scheme of their PC. However I opted for this one as it was slightly cheaper.

  • Ramez M.

    > 3 day

    Amazing product but its a bit large. Check dimensions of your case

  • salomon

    > 3 day

    Excelente, lo uso para mi ryzen 9 5900x y no pasa de 80° full load con un solo cooler (me limita el gabinete a 165mm)

  • Anonymer Kritiker

    > 3 day

    Qualität, Kühlleistung, Accessoires und Anmutung sind über jeden Zweifel erhaben. Leider ist der Kühler so monströs, dass er in meinem Asus ROG x79 Motherboard ganz knapp an die Grafikkarte stösst (die Backplate der Grafikkarte braucht halt ein paar Millimeter, so dass es mit dem Platz nicht mehr reicht). Ich musste die Grafikkarte in den unteren PCIE x16 Slot montieren. Der zweite Ventilator stösst an die Speicherriegel, ragt also weit nach oben und berührt fast das Glaspanel des Gehäuses. Das sieht nicht besonders elegant aus, aber zur Not hätte ein Lüfter auch gereicht. Das Brrrraun derrrr Lüfterrrrrr gefällt übrrrigens meinem Opa. Derrrr hatte mal Hemden in dieserrrrr Farrrbe. :-) Wären die Lüfter nicht so teuer, hätte ich sie gleich durch die grauen ersetzt. Ein Stern Abzug wegen dem hohen Preis, der eventuellen Enttäuschung, sollte er dann doch nicht auf das Board passen, und dem Umstand, dass man das Teil nicht mit den grauen Lüftern bestellen kann.

  • tototoo2u

    > 3 day

    At first I was put off by the size of it but that quickly vanished when it came time to install. The installation is easy even for a somewhat novice builder as myself. It does take up a lot of room but that is minor. It comes with a noise reducer adapter but I didnt need it. The fans run so quiet I am not even aware its running. It does its job and keeps the CPU within normal temps. The only bad thing is that I will have to take it off to upgrade my RAM but I can live with that as it is so easy to install. Will consider Noctua again when it comes time for an upgrade.

  • Mickaël

    > 3 day

    Excellent, emballage parfait, impressionnant et imposant mais sinstalle aisément, que ce soit pour un processeur AMD ou un INTEL il suffit dutiliser le sachet adéquat. Ma config est une carte mère Asus Maximus IX Hero, processeur i7 7700k, ventirad NoctuaNH-D15, 4 barrettes Hyper X predator, alimentation SMART PRO 750W RGB 80Plus, tour Termalteck. Merci Amazon pour son sérieux et sa rapidité.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
LCK your love shop
LCK your love shop
( 0 reviews )
Visit Store
Top Selling Products