Noctua NH-D15, Premium CPU Cooler with 2X NF-A15 PWM 140mm Fans (Brown)

(0 reviews)

Price
$92.36

Quantity
(10000 available )

Total Price
Share
3568 Ratings
3140
260
72
33
63
Reviews
  • Justin

    > 3 day

    Ive owned this fan for over a year now and can tell you if you want an air cooler that performs as well as a watercooler, without the worry of some liquid ruining your system, this cooler is a must own. Then you can educate yourself on the world of Noctua and the absolutely amazing products that they own.

  • DeLacy

    Greater than one week

    I stopped looking for any other cooler of this type when I found this Noctua with a double fan layout. My Processor idles 28-29C. My Cpu stays chillin under game loads below average- (10900K) note: I used MX3 on these temp references. < Nonetheless, this Noctua Cooler does remarkably well indeed and it is quiet.

  • Kirk

    > 3 day

    Im usually not one to write a review, but in this case, I have to add to the praise about this cooler. Im sitting here writing this as Im running a prime95 test on my FX9590 @ 4.7GHz. AMD OverDrive shows the thermal margin getting no closer than 15 degrees from max. Ambient room temp when the test was started was roughly 21 degrees C. CoreTemp (actual temperature) numbers run right along with OverDrive (degrees from thermal margin) showing a maximum of 55 degrees C on a full load. I may have read somewhere that the low-end temps are unreliable but I show anywhere from 18-25 C at idle. The processor is just as happy as can be and thats only due to this cooler.

  • Thomas Llewellyn-Jones

    Greater than one week

    This replaced my Ttake Frio Advanced for an i7-4930. This is noticeably quieter and the processor runs about 5 degrees cooler at idle. Its beautifully made and packaged compactly, with the ability to have one or two fans simply by unclipping one. Be careful to check the width of your case as it is very tall.

  • Disco

    31-10-2024

    This beast is easy to fit and and super quality. Brilliant modular packing/boxes within boxes all plain cardboard for better recycling. Comes with AMD and INTEL plus splitters, thermal paste and extender cables and the 2 big 140 mm fans. The fans can be mounted easily at different heights but check your case as it is big. I think you can also use 120 Noctua fans if you hit problems or just fit 1 fan but unlikely to be as efficient in cooling.

  • Abdul Kassulke

    > 3 day

    Temperature diminuite drasticamente in game, ventole silenziosissime anche al massimo della velocità. Oggi ci sono più di 30 gradi, ma lui non ha fatto una piega.

  • Destin Prime

    > 3 day

    It has made it possible to OC my I8700k and keep it stable at 5100mhz!

  • Matthias M.

    > 3 day

    Ein mächtiger CPU-Kühler der nicht in jedes Gehäuse passt. Habe meinen i5-2500K vom alten Gehäuse (noname) mit Intel Stock Cooler in ein Fractal Define R5 mit diesem Noctua NH-D15 umgezogen. Vorher musste ich den Prime95 Stresstest nach wenigen Minuten abbrechen, weil die CPU Temperatur über 90 Grad erreicht hat, jetzt läuft der Test Stundenlang und die Temperatur erreicht kaum 50 Grad.

  • Andrew Galt

    > 3 day

    Good / great bits

  • RH UK

    > 3 day

    The two fans need to be fitted after the heatsink is in place. There was not room to fit the second fan since my standard memory modules would be in the way. However the second fan is not required with the large case that I have,.

NH-D15 HeaderNH-D15 Header

Built on the basis of the legendary NH-D14 and carrying on its quest for ultimate quiet cooling performance, Noctua’s flagship model NH-D15 is an elite-class dual tower cooler for the highest demands. Its expanded heatpipe layout and two premium grade NF-A15 140mm fans with PWM support for automatic speed control allow it to further improve the NH-D14’s award-winning efficiency. Topped off with the trusted, pro-grade SecuFirm2 multi-socket mounting system and Noctua’s proven NT-H1 thermal compound, the NH-D15 forms a complete premium quality solution that represents a deluxe choice for overclockers and silent-enthusiasts alike.

NH-D15NH-D15

NH-D15 Single Fan RAMNH-D15 Single Fan RAM

NF-A14 fanNF-A14 fan

NT-H1NT-H1

Widened fin stack and expanded heatpipe layout

Compared to the NH-D14, the NH-D15"s fin-stack has been widened from 140 to 150mm and its heatpipes are now spaced further apart, which allows for a more uniform heat distribution over a larger surface area and thus contributes to the NH-D15"s superior efficiency.

High RAM compatibility in single fan mode

Thanks to its recessed lower fins, the NH-D15 provides 64mm clearance for tall memory heatsinks in single fan mode, making it compatible with most high end RAM modules on the market. In dual fan mode, the NH-D15 should be used with standard height RAM (up to 32mm). In chassis with more than 165mm CPU cooler clearance, the front fan can be moved upwards to make room for memory modules taller than 32mm.

Dual NF-A15 140mm fans

The NH-D15 features two of Noctua"s premium class NF-A15 140mm fans. Complying with Noctua"s AAO standard and featuring sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A15 has quickly built up a reputation as one of the best 140mm fans on the market.

NT-H1 thermal compound

Noctua"s much-acclaimed NT-H1 is a well proven pro-grade TIM solution that provides minimum thermal resistance, excellent ease-of-use and outstanding reliability, which makes it suitable for use in professional server and workstation environments.

NH-D15 specNH-D15 spec
Measurements
  • Height (without fan): 160 mm
  • Width (without fan): 150 mm
  • Depth (without fan): 135 mm
  • Height (with fan): 165 mm
  • Width (with fan): 150 mm
  • Depth (with fan): 161 mm
  • Weight (without fan): 980 g
  • Weight (with fan/s): 1320 g
Materials

Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating

Cooler Specifications

Scope of delivery

  • 2x NF-A15 PWM premium fan
  • 2x NA-RC7 Low-Noise Adaptor (L.N.A)
  • NA-YC1 4-pin PWM y-cable
  • NT-H1 high-grade thermal compound
  • SecuFirm2 mounting kit
  • Noctua Metal Case-Badge
Fan compatibility

140x150x25 (with 120mm mounting holes), 140x140x25 (with 120mm mounting holes), 120x120x25

d15d15

6 heatpipe dual tower design

As compared to conventional single tower heatinks, the NH-D15"s fine-tuned six heatpipe dual tower design provides more surface area, better heat-distribution and superior airflow efficiency in dual fan mode.

NH-D15 table NH-D15S table NH-D15 table NH-D15 chromax.black table NH-D15S chromax.black table
NH-D15 NH-D15S NH-D15 SE-AM4 NH-D15 chromax.black NH-D15S chromax.black
LGA2066, LGA2011-0 & LGA2011-3 with NM-i20xx
LGA1700 with NM-i17xx-MP83
LGA1200, LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) with NM-i115x-1200
LGA775 & LGA1366 with NM-I3 with NM-I3 with NM-I3 with NM-I3 with NM-I3
Xeon LGA2011 Narrow ILM / Xeon LGA1366 & LGA1356 X X X X X
Xeon LGA3647 X X X X X
Xeon LGA4189 X X X X X
AM5
AM4
sTRx4, sWRX8, TR4, SP3 X X X X X

Related products

Shop
Ji-soo's online store
Ji-soo's online store
( 1073 reviews )
Visit Store
Top Selling Products