Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Christian H.
> 3 dayPerfect!
-
kj bm
Greater than one weekfan not coming on ,,,taaaa
-
Travis C.
> 3 dayWhat is there to say this stuff is legit.
-
Sarina Lueilwitz
> 3 dayWorked prefectly for the price and itll last for future uses.
-
mike
> 3 dayFunctions as intended.
-
Mike
> 3 dayArctic silver 5 USED to be one of the best . Now it is just ok and performs a couple degrees above most top of the line pastes. I bought this one because it was available for quick delivery but 8f I could wait I would go for zallman.
-
Manuel J Arvelo
> 3 dayExcellent heat transfer paste. Recommended.
-
Gerald
> 3 dayIve been using Arctic Silver for years in all of my PC builds, and its yet to disappoint. Repasted my GPU and CPU, and thermals came down around 10%. Couldnt be happier.
-
Sebastian
> 3 dayReceived quick and its as described
-
Brandon
> 3 dayI am an IT professional and this is the only brand of paste I use. Performs great and have never had any issues.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
