Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Renee Lynn
> 3 dayMy brother in law was having issues with his PS4 overheating and completely shutting off, within minutes of loading a game. The console itself didnt feel hot to the touch when this happened (which is what Id assume would be the case if it was overheating...I was wrong). He got frustrated and decided to buy a new one - so he gave his old one to us.
-
Pete H
01-11-2024Lowered my CPU temps by 20c
-
You Save 101
> 3 dayUsed this on my last i5-2500 rig and it lasted for almost 10 years. Retired it before it died, it still works actually.
-
Morbius
> 3 daySpectacular performance if spread thin. Absolutely wonderful thermal performance.
-
Laurence freshwater
> 3 daycame early and good quality
-
Rillachipz
> 3 dayGood for its price
-
John Barrett
Greater than one weekIt does what it says an it works
-
Alex morgan
> 3 dayIve used this before Aplus
-
Manuel J Arvelo
> 3 dayExcellent heat transfer paste. Recommended.
-
Cristian Borja
> 3 dayTop quality stuff
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
