Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Joe
29-10-2024I used this same cooling paste 5+ years ago and my fan was racing lately, with little heavy processor usage. Cleaned the chips off and added this again, started up and no fan running under the same load, for heavy load its running as expected. The whole process took 20-25 mins. This is for a laptop over 10 years old btw. 5 stars.
-
Vic L
> 3 dayExactly as advertised
-
Kyle
31-10-2024From this seller, comes in plastic dime baggy. Seems sketchy.
-
Cheyenne
> 3 dayDoes its job!
-
Christian Carneiro
Greater than one weekCkassic of the classics, ive used Artic sylver for 20 years now. This one was for an emergency maintenaince on my dads 12 year Dell Studio...i dissasembled it entirelly and applied the Artic Silver to the cpu and chipset...it runs smooth now...ventilator is much quieter now ( thus the thermal edficency is better). Artic silver is like your credic card...dont leave home without one!
-
Andrew
> 3 dayEasy to apply.
-
Milenko Ivanovic
> 3 dayGood cooling properties. There are better paste materials now. Setting time, slight conductivity.
-
steven
> 3 dayWorks great!!
-
Luis
> 3 dayYou will have enough for at least two applications on a chip.
-
Russell A. Fry
> 3 dayWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
