Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Henk
> 3 dayAs described , came in time.
-
David
Greater than one weekHe conseguido unos 5 grados menos de calentamiento en mi Intel i7 7600K.
-
Ethan
> 3 dayNot much to say, its Arctic silver!
-
eddie
Greater than one weekNice
-
Mr. Harry Bruen DVM
Greater than one weekDoes the job
-
Adrian
> 3 dayEasy to spread, works perfect.
-
Garrett Olsen
> 3 dayDont spread the stuff, just put a pea sized amount in the middle. Pressure will do the rest. Ive used this stuff for years on many many systems. Im not saying its the best but its always worked for me.
-
Wa
> 3 dayWas upgrading CPU on older desktop. All went smooth except those Intel push pins. One broke when I was installing the cooler back on. No problem, didnt even have to reapply paste. Replaced the push pin and finished the cooler install. Temps are excellent on QX6700 Quad Core.
-
kgb
> 3 dayWorked great . Fixed old PS3 . Runs like new now
-
Elites
> 3 dayIf you need thermal cooling paste for a DIY project such as for heatsink in PC, Laptop, etc. Get this one which is an excellent product without having any issue I used it on 3 laptops, 2 desktops, and works great.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
