Nabob Deals Arctic Silver 5 Thermal Cooling Compound Paste 3.5g Heatsink Paste High-Density Polysynthetic Silver with Bonus Tool (Arctic Silver with Bonus Tool)
-
Travis C.
> 3 dayWhat is there to say this stuff is legit.
-
Maegan Strosin
> 3 dayAmazing product. Legendary. Been using this since the old Pentium 4 Prescott days.
-
John Barrett
> 3 dayIt does what it says an it works
-
Ashtyn Jones
Greater than one weeksmaller than i thought but cheap and got the job done
-
Russell A. Fry
Greater than one weekWhat more can I say? It is heat sink compound, as long as the component doesnt over heat it is doing its job.
-
Joshua
> 3 dayIts just a good product that handles thermal abuse well. the container it comes in has a rubber cap which seem genius because it never seems to gum up after pulling it out of storage for another build
-
Xial
> 3 dayIts a really thick, sticky thermal paste, a bit different from what Im used to using. That said, Im getting good temperatures from the stock cooler sitting on my processor at the moment using this.
-
Laura Miller
> 3 dayGood stuff
-
charles owens
> 3 dayThe spreader tool is an extra plus!!
-
Charles Edwards
> 3 dayIt works.... It IS a bit deceptive in application. I thought I spread enough to do the job. I actually put on about 2 1/2 times as much as needed.Spread it very thin.
Performance
3 to 12 degrees centigrade lower CPU full load core temperatures than standard thermal compounds or thermal pads when measured with a calibrated thermal diode imbedded in the CPU core.
Coverage Area: A 3.5 gram syringe contains enough compound to cover at least 15 to 25 small CPU cores, or 6 to 10 large CPU cores, or 2 to 5 heat plates. At a layer 0.003" thick, the 3.5 gram syringe will cover approximately 16 square inches
Arctic Silver Thermal Cooling Compound Paste 3.5g High-Density Polysynthetic Silver
Arctic Silver 5 does not contain any silicone. The suspension fluid is a proprietary mixture of advanced polysynthetic oils that work together to provide three distinctive functional phases. As it comes from the syringe, Arctic Silver 5"s consistency is engineered for easy application. During the CPU"s initial use, the compound thins out to enhance the filling of the microscopic valleys and ensure the best physical contact between the heatsink and the CPU core. Then the compound thickens slightly over the next 50 to 200 hours of use to its final consistency designed for long-term stability. (This should not be confused with conventional phase change pads that are pre-attached to many heatsinks. Those pads melt each time they get hot then re-solidify when they cool.
The viscosity changes that Arctic Silver 5 goes through are much more subtle and ultimately much more effective.)
|
|
|
|
|
|
|---|---|---|---|---|---|
| Arctic Silver 2 Pack + Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver Starter Kit | |
| Package Contents | Arctic Silver x2 With Tool | Arctic Silver + Arctic Clean & Cloth | Arctic Silver + Pad/Tool & Cloth | Arctic Silver + Tool & pad | Arctic Silver + Cloth + Static Kit |
Related products
