MTB SS304 Stainless Steel Welded Wire Mesh 36 inches x 10 feet- 1/2 inch x 1/2 inch Mesh 18GA(1.2mm)

I learned the hard way that chipmunks like to nest in underground irrigation control vaults. Fortunately I got to fix the problem before they munched on the wires to my valves! I had to excavate the control vault, and line the hole with this stainless steel (rabbit wire) 1/2in mesh, and then replace the vault. SS wire wont corrode & disintegrate like galvanized wire will. Thats important, as I would not want to have to do this again! I put in a 2nd vault, out in the front yard late this past Fall & made sure to line the hole with this mesh first, before assembling the vault. MUCH easier when you do it RIGHT the FIRST time!

Used to bird-proof a gas grill with several openings in the back and below. Once the birds found this home, they were unrelenting nest builders inside the grill. Sheet stainless would have been expensive and hard to cut, form, and drill in this application. I was able to cut this mesh with tin snips and diagonal pliers and formed by hand over a 2x4 (wearing leather gloves). The welded wire intersections generally took considerable abuse without failing. Im sure Ill find other projects for whats left over.

Wire worked great

Great thing to have for gardening!

They say it’s 10ft length but it’s 8ft 5inch. Only.

Bought this for a project, so far so good

For the price its ok, but the welds are awful and constantly falling apart.

as described

I love crabbing and build crab snares myself. Have been looking for 0.5X0.5 inch 16 gauge mesh for the past year. There are 2-3 sellers on Amazon selling it (vinyl coated ones). But they are FXXX expensive, I am not paying $170 for the snare mesh. Until I found this replacement. It come so quick, next day delivery. Problem is, it is 18 gauge (1.2mm in diameter), I am looking for 16 gauge (1.6 mm diameter). But stainless steel is harder than galvanized steel itself, which makes up a little bit. The damn rock carbs are so strong they damage my snare cage in a couple uses. I was using 16 gauge mesh from Lowes, which only cost $18 per roll. But they only carry 0.5X1 inch ones. The 0.5X0.5 inch opening is critical because it will increase my carb catching rate a lot(their claw get stuck in the small hole when I pull), and also prevent them from pulling my bait out too easily. So excited now, cant wait to build a few snares and go!

Very high quality, welds are very good with very few missed crossings.