Double Sided Tape, Heavy Duty Mounting Tape Clear, Vhb Waterproof Foam Tape,Special for Automobiles,for Autos, House & Office Decorations（1/4 in x 15.6ft）, Made of 3M Tape

Used this to put a plastic accent strip back onto our travel trailers trim that the factory glue failed on. This tape has held up through a south Texas Summer in a RV that bakes in the sun. Factory glue didnt last two months of cool Fall weather.

Did not work adhesive to weak. Separated off glass and off very light metal framing

Used to replace tape on window deflector

I use a variety of 3M VHB tapes on a daily basis. This one is thin and worked perfect for my application. I needed a clear tape with almost permanent bond. The adhesion is great after the full curing stage, around 24 hours. If you make a mistake on placement within the first 30-45 minutes and without applying much pressure, you can readjust. Overall it’s a good tape. No complaints. Remember to keep it in the zipper bag to prevent it drying out and to keep debris off the edges.

Im using it to hang cable guides on walls which arent completely flat. It does the job nicely; a thinner/less rubbery double-stick tape would have more trouble gripping this surface. For some uses, its adhesion may be _too_ strong -- removing the backing can be tricky (I use a knife blade to persuade a corner to lift), and if you stick it to painted walls, trying to remove it is likely to lift the paint. Not the best adhesive to use if you want to mount something temporarily. For what it does, the price is entirely reasonable. Ive ordered four rolls so far...

Bought it to apply on after market rear bumper kit. I cleaned the area and applied the tape. I applied little heat too and put pressure for 45-60 minutes. After a day it came off. I wont be buying this product anymore

I used this tape to attach my front spoiler lip and it really holds tight. I HIGHLY recommend this product!!

Hard to remove from roll and apply. It bunches up and cannot straighten out to apply smoothly.

This tape is very tacky, conforms well to uneven surfaces and can be remove and relocated (with some effort) Only difficulty is removing the red plastic backing; its very thin and slick thus difficult to grasp, BUT that is minor compared to how well the tape works. Recommend applying the tape to one of the two surfaces to be adhered, the remove the red backing and then press the two surfaces together.

We use nothing but the real 3M brand to secure alarm connectors on existing windows. When you need an adhesive to be extremely reliable and stay in place for years this is the way to go.