Double Sided Tape, Heavy Duty Mounting Tape Clear, Vhb Waterproof Foam Tape,Special for Automobiles,for Autos, House & Office Decorations（1/4 in x 15.6ft）, Made of 3M Tape

Bought it to apply on after market rear bumper kit. I cleaned the area and applied the tape. I applied little heat too and put pressure for 45-60 minutes. After a day it came off. I wont be buying this product anymore

I use a variety of 3M VHB tapes on a daily basis. This one is thin and worked perfect for my application. I needed a clear tape with almost permanent bond. The adhesion is great after the full curing stage, around 24 hours. If you make a mistake on placement within the first 30-45 minutes and without applying much pressure, you can readjust. Overall it’s a good tape. No complaints. Remember to keep it in the zipper bag to prevent it drying out and to keep debris off the edges.

My generic microfiber dash mat kept sliding down during sprints in my EV (3.6s), three feet of this tape over the middle fixed the problem.

This tape works well with Palram polycarbonate roof panels Easy to apply; just wipe the surface of any loose debris and dust, roll along the surface and cut with average utility shears; pull off red protective top layer once you are ready for the next sheet. Gives good adhesion between layers and doesn’t seem affected by temperature swing or moisture.

Easy to use and strong adhesive

The 3M VHB tapes are just the best. Discreet adhesion when and where you need it. Sticks well and holds many surfaces. In case you did not know, the VHB stands for Very High Bond. As with all tapes of this nature, best to let it cure for 24 hours if you can.

Original 3m, exactly what I was looking for. Bulk pricing is slightly cheaper online.

Very strong tape. Clear and about 1/16 inch thick. Somewhat flexible. Difficult to remove, but can be scraped off with a razor blade scraper and some effort. Although I havent tried to remove it from a painted surface, I think it would probably damage the paint if removed.

Used to replace tape on window deflector

Picture doesn’t match the product a lot smaller than I expected it’s stuck to the bag when opening the package I had to peel the plastic off piece by piece from the adhesive roll this is unnecessary and time-consuming