Yonico Slot Cutter Router Bit 1/4-Inch Height X 3/8-Inch Depth 1/4-Inch Shank 14184q

Met expectations

This is a great bit for the money. Sharp and accurate. Dropped it a few times as well and the carbides havent chipped, so it seems pretty durable as well. Would buy again.

I was a little worried about using a 1/4 shank bit for slots without bending the shank. I set it up on a router table and adjusted the guide, and taking my time I slotted about 200 ft of softwood and 60 ft of hardwood and the bit worked fine. Some tearing of the softwood and a little scorching of the hardwood. Bit still looks good and my projects done.

Got this router bit to make some rabbets in some cabinet doors, this was my first time using a router and it worked perfectly. I would definitely recommend this product and will most definitely buy more!

Nicely constructed, carbide cutters seemed uniform (least with a Mitutoyo caliper, didn’t bring out the mic to verify). However the bearing shielding popped loose and if I had to guess, it’s gonna seize up right quick with all that dust. Only got about 20 feet of cutting into OSB before this happened. Will try to contact Precision Bits and see if they warranty it (plus I’d like to grab a larger bearing to drop the depth of cut down to 1/4”).

So far so good, works well. I wouldnt consider this a professional grade bit but its perfect for diy uses so no complaints from me. I have only used this on maple and found doing 2 passes with the second pass at full depth prevented chiping out peices. Very happy with the bit, I would definitely buy other bits in this brand. As others have mentioned seems a little more than a 1/4 inch in height but I was able to adjust my router base accordingly. Couldnt ask for more.

They nice bits, sharp and seem to be last. Would recommend.

Did a nice job running through some PVC material. Clean finish. With it came with a bearing or two, as I elected to buy a bearing to get the depth of cut closer to what I wanted. Not a big deal, but spent more on another bearing than the cutter! Happy with it, runs chatter free.

worked exactly as I needed it to.

Works fine