Wireless HDMI Transmitter and Receiver, Plug & Play Portable Wireless HDMI Extender Kit for Streaming Video and Audio to HDTV/Projector/Monitor from Laptop/PC/TV Box.

(1105 reviews)

Price
$151.19

Quantity
(10000 available )

Total Price
Share
45 Ratings
24
5
2
3
11
Reviews
  • J&M

    > 24 hour

    Very easy to use. It truly is plug and play like it says. The USB on the back of the TV is perfect to power the receiver. It had mentioned the possibility of not needing to power the transmitter with USB if it was close enough. Even 5ft away I still needed the USB to power the transmitter. It could be my laptop in particular, but I would plan on using USB all the time. Still not a problem, but there is another cable there. They are very light. They are going in my service bag for sure as a great way to not have to carry a long heavy HDMI out everywhere. 10/10

  • Quanisha pinkney

    > 24 hour

    I hate that my computer doesn’t allow my screen share how I want to but with this item I can screen share perfectly even if I’m working from home want make my work screen bigger I can use this have it displayed on my tv amazing find better get you one

  • jb

    > 24 hour

    Worked well for about 2 weeks and then would not pair. Unplugging and letting it sit for a few minutes was a temporary fix, but signal was lost after about 30 min, I used a dedicated USB power source, so it is not likely that the power source was a problem.

  • Mr Gadget

    > 24 hour

    I bought these to broadcast from 1 TV to another and thought it would be as easy as plugging one stick in 1 tv and the other in the second tv. Well that proved not to be the case. I guess I am not as tech savvy as other posters but it is not that simple. For starters you need power to each usb stick and need to have access to the tv USB’s as well. To make a long story short, it was just to much of a hassle to use them that haven’t even used them yet and I bought these 5 months ago.

  • Bill Strand

    > 24 hour

    I wanted an HDMI TX/RX to move my TV across the room from the cable outlet without digging into the walls or floor. When I tried to use it at only 6 feet separation for a test, it setup very easily but the latency degraded the signal so badly it was very hard on the eyes. I would not recommend this product.

  • David

    > 24 hour

    We have a TV above our fireplace with no nearby place for a DVD player (and I hate visible cables!). This allowed us to place our DVD player on an end table on the other side of the room. Lost one star because connecting can sometimes take a bit of trial and error... And there occasional picture skips/blips. Still, very glad we bought this!

  • Reynaldo Hernandez

    > 24 hour

    So these have a good range since they need extra power. I use it on a TV and I can get video and sound without a problem.

  • From Iowa

    > 24 hour

    Wish it had lasted. Used 60 days without any issues. Very pleased... then no signal. Disappointed as we liked the quality. Will try to get replacement.

  • Gtrplr333

    > 24 hour

    I was using this device to connect my PC to a projector. It worked the first few times with no issues. Eventually I kept having to do things like refresh the display adapter, extend display, duplicate display, etc., reset the connection on the transmitters themselves, etc. And in no particular order, in order for them to work. And then one day they just stopped working. The RX and TX are reading each other, but for some reason not executing. I am no expert on transmitters, but inso being tech savvy enough, I tried the following when I became desperate : 1. Hit RX button for 3 seconds, took a picture of the QR code on my phone. I noted that it is an EZCast receiver. 2. I downloaded EZCast onto windows. EZCast showed the exact SSID from the transmitter. *Note, as it is plug and play, these devices SHOULD NOT require a password. However, I typed the Pal where it says password anyway. This only resulted in a mismatch. 3. But then, just to ensure I have covered all bases: I checked my driver on my PC. I turned off windows firewall just to make sure it wasnt a firewall issue. Everything checked out. Now... Here is the final verdict : My PC detected the TX just fine. There were no issues there to begin with. My projector reads the RX just fine. Again, no issue to begin with. The TX and RX are detecting each other, but are NOT performing. NO display whatsoever. FAULTY product that didnt even last 30 days. Now it is passed 30 days and is too late to return it. For $180 bucks? Unbelievable, and nobody can tell me I dont know more of what Im doing than the average consumer to come to this conclusion. Buy AT YOUR OWN **RISK.**

  • Toy D'Amore

    > 24 hour

    Garbage. After about 10 minutes of use, it will consistently disconnect itself. If youre across the room you, youll have to walk back to the transmitter and push the button. Its a huge pain.

22

Wireless HDMI extender can be widely used in your life and business.

  • Its advantage is that it connects devices wirelessly, plug and play, no need to install applications and avoid wiring clutter.
  • Because the wireless HDMI extender is no longer limited by the range of the wire. In various occasions, the work efficiency can be improved very well during the use process, and the volume is small and does not take up space, and it is also very convenient to carry. Very suitable for commercial use/restaurant/bar/home entertainment/business/conference/education/training/live broadcast/learning, etc.
11

Enjoy a Wireless HD video & audio transmission to your HDMI TV.

Transform your living or workspace with our innovative Wireless HDMI Transmitter & Receiver Kit, allowing you to connect devices to your monitor, projector or television without the hassle of any wires or cables. Whether you"re looking to improve your technology experience in the office or TV room , it couldn"t be more appropriate.

  • Full 1080@60hz meets most video/audio streaming requirements.
  • Plug and Play, wireless, no need to install any apps.
  • Wireless connection to avoid messy wiring.
  • Long transmission distance up to 98 feet (30 meters) away.
33

How to deal with connection failure

1. Please Press the receiver function button for more than 3 seconds, and the prompt will pop up on the interface. Release the button to pair with TX. Wait for the transmitter to enter pairing mode.

2. Press the transmitter function button for more than 5 seconds, the indicator will flash for pairing, and wait for the transmitter indicator to be always on, indicating that connection is successful.

Easily start mirroring transmission after connected, simple and efficient operation

44

55

66

  • Connect the receiver (RX) to the HDMI port of the display
  • Connect the power adjust the signal source

  • Connect the transmitter (TX) to the HDMI port of your computer
  • Connect the power
  • Run the driver program to start mirroring

  • Press the button to switch from disconnect/reconnect

Related products

Shop
Carlin Happy Store
Carlin Happy Store
( 2317 reviews )
Visit Store
Top Selling Products