WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
Streuzel
Greater than one weekAlles wie beschrieben und prompte Lieferung - Danke
-
SANDRA
> 3 dayProduct works great. I had no issues with installation. It took less than five minutes to get it up and running. I would highly recommend this product to anyone who has range issues in their home.
-
Fox
> 3 dayEs tut was es soll. Keine Beanstandungen
-
H. M. Muths
> 3 dayDer Kundendienst ist hervorragend nur kam leider kein Kauf zustande
-
SANDRA
> 3 dayI am happy with mine all things considered. Just plug it in next to your router and hit the WPS buttons on both devices and they connect, its that easy. Then move the extender to wherever you need it and plug it in and wait for everything to go green, as it may take a few seconds.
-
KIMBERLY
> 3 dayMy base router has a speed of 114 Mbps and the extender wifi speed was 42 Mbps. So happy with this unit and the best part is I only need to use one unit for the whole house.
-
Maf1109
> 3 dayHabe mir mittlerweile mein 4. Kabel zugelegt um mein Zimmer zu vernetzen - jedes Mal eines von BIGtec.
-
JOYCE
> 3 dayWorks fantastic. Our wireless doesnt reach the upstairs corner of our house and this extends the wifi all the way through. Has helped save our cell phone bill from data overage. Does cause issues with my wireless Uverse receiver sometimes.Product works as advertised. Had a dead spot on the second floor of my house and figured I give this product a try. Setup was painless and took about 5 minutes. Would recommend this for anyone who needs to extend their Wi-Fi signal to an area where their router will not reach.
-
Michael
> 3 dayDas Kabel ist gut, alle 8 Adern sind 1:1 durchverbunden.
-
Ina
> 3 dayLieferung kam promt. Kabel hat die richtige Länge, ist schön flexibel und dünn. Übertragungsrate passt. Ich habe es als LAN-Anschluß für den Fernseher genutzt, da mit W-Lan ständig das Streaming unterbrochen wurde. Jetzt läuft alles flüssig.
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
