WiFi Extender Signal Booster Long Range Coverage to 8000sq.ft and 45+ Devices, WiFi 2.4&5GHz Dual Band WPS WiFi Signal Strong Penetrability, 360°Coverage Supports Ethernet Port
-
MARGARET
Greater than one weekMy base router has a speed of 114 Mbps and the extender wifi speed was 42 Mbps. So happy with this unit and the best part is I only need to use one unit for the whole house.
-
MARGARET
16-11-2024This was used in a small apartment in New York. Just try to find place in your apartment where your repeater could receive good signal from your first modem (router), after that it will work awesome.Shipping was fast with amazon prime.Ordered on wednesday during the day and received it next morning 9.40 am via lasership.
-
JERRY
> 3 dayAfter carefully following the installation instruction and checking my connection near the extender, I found no noticeable improvement in signal strength or quality. Couldnt believe how pretty easy it was to set up. Pretty much plug and play. The extender found my network and is working perfectly!
-
MARGARET
> 3 dayMy Linksys extender has been sucking bad. I bought this extender, plugged it in waited for it to boot up. I plugged in the extender in the kitchen (two walls away from router), I receive full bars from router to extender and full bars to the backyard and I can finally enjoy my internet ready stereo/blu ray player to watch Amazon videos.
-
Thorsten
> 3 dayKabel bekommen, Fritzbox und TV Box verbunden, und läuft einwandfrei.
-
JOYCE
> 3 daypretty easy enough to setup. Could be more intuitive but not too bad...just take a bit of focus.Like the flexibility of using wifi or cat 5 cable to connect. Great item - did a great job at creating a secondary wifi signal. I was hoping it would help strengthen the existing signal but this works as great.
-
qttggw
> 3 dayThis Wi-Fi Range Extender was easy to set up. I just plugged it into an electric outlet, waited for it to turn green, pressed the WPS button on my router and on the extender and waited for another green light.
-
daniel s.
> 3 dayAlles gut!
-
hhhsssa
> 3 dayfor some reason if I had even a regular plug in the outlet, the extender couldnt get a good signal from the router. I figured out the best location and then moved the other cords to different outlets.Everything seems good to go now.
-
JOYCE
> 3 dayone strategic location permits me to pick up wifi through the house despite granite counter tops and limestone floors and showersworks great
|
|
|
|
|---|---|---|
4*3 dBi External Antennas180° and 90° rotating antennas can eliminate dead area and improve your existing WiFi coverage. For better performance and stable WiFi network with speeds of up to 867Mbps, 2.4GHz has farther penetration while 5GHz has faster speed |
Smart Signal IndicatorsSignal LED indicates wireless signal strength between WiFi extender and your existing router. After initial setup, you can move your WiFi extender to any electrical outlets by reading the color of signal LED. |
With Vent Hole & WAN / LAN PortAir vents on both sides enhance heat dissipation capacity of the WiFi extender and ensure a safe working environment. Its WAN / LAN Port allows the WiFi extender to act as a wireless adapter to turn a wired device into a wireless one. |
|
|
|
|
|---|---|---|
Repeater Mode - Wireless to WirelessAmplify the WiFi signal of the wireless router, extend the coverage of the WiFi signal, and effectively solve the problem of weak WiFi signal and WiFi dead zone. (Suitable for home, office use) |
Repeater Mode - Wireless to WiredConvert wifi signals into wired signals through network cables to meet the network requirements of wired electronic devices, such as TVs, desktop computers, etc., reduce the distance of network cables, and avoid cluttered network wiring. |
Access Point Mode- Wired to WirelessUse Ethernet cable to connect this WiFi booster range extender to any Internet enabled Ethernet port in your room or Ethernet port of existing router, you can create a new dual band wireless network. Excellent for using at home or when travelling in hotel rooms. |
Reminder:
- The working status of the repeater can refer to its smart indicator light.
- WiFi signal booster is only limited to increase the coverage of the wireless signal, but not to increase the speed of the network.
- When the repeater expands the signal, it does not need to plug in the network cable. It can receive the signal of the router directly by plugging it into the socket, and transmit the wireless signal.
- When the repeater is unplugged or powered off after the setting is completed, it does not need to be reset. The original configuration information has been saved, unless you manually restore the factory state.
Related products
