Weiler 56089 Die Grinder Cut-Off Wheel and Mandrel Kit Including 56490 Mandrel and 3-Inch x 1/16 Wolverine T1 Thin Wheels, A36T, 3/8 AH (1 Mandrel and 10 Cutting Discs)

I believe and stand to be corrected this item is unsuitable for the thicker and heavier grinding 1/4 inch discs as specified. This is due to the thicker the disc the less threads are engaged. This is exasperated by the un-threaded internal recess and the extra weight of the thicker discs. I would recommend using this mandrel safely using cutting discs of a thickness 0.035- to 1/8 or 0.8 mm to 3 mm. Very suitable for this task.

great tool

Got this to use with 3 cut off wheels on my die grinder. For that, it works perfect! There doesnt seem to be any noticable vibrations when the RPMs are turned all the way up. The screw on the top does a great job at holding discs/wheels in place. Be careful not to lose the little washer that is sandwiched in between as this helps to hold things in place. The 1/4 shank is right on size wise, and fits in my angle grinder nice and snug. Would buy again!

I had to replace an old wore out one, over 10 years old...

Work without any problems! Great product!

Good product at a fair price.

Wrks great fit perfectly

Its doing its job

Seems to work solid….

The 10 wheels are all shipped loose with the shaft loose in that thin oversized cardboard box you see in the picture and no tape on the box at all to hold it together. So the shaft and the wheels beat each other up during all the handling. The wheels should have been taped or secured together and there should have been some padding around them inside the manufacturing box. Im talking about the manufacturing box, not the shipping box.