WAF 6200Z 10mm x 30mm x 9mm Deep Groove Sealed Ball Bearing (1pcs)

This worked perfectly to repair my Craftsman table saw. When the original bearing seized I thought I was going to need a new table saw, but instead for around $5 and a little bit of elbow grease, this saved the day. Six months and many projects later it is still functioning fine.

I tried using these to replace worn bearings in a CNC mini mill. The are too tight and it bogs down the small motor to where it cant perform even light cuts with soft materials. I think these have been packed with too much grease to be useful for my application. The OEM bearings were loose, almost like a fidget spinner and these you cant barely get one or two whole rotations before it stops.

I have a ProForm 940S exercise bike that I have rode so much the last few months I wore out the bearings. The ones on the rear hub were the 6200Z style which no one in my area carried. Ordered these off Amazon and installed today. Bike is running good as new !! :)

Bearing fit fine but the very expensive rubber cap didn’t Read my review about the cap Be safe all

thank you!

Does not coast freely but is super smooth and does not wobble at all. Feels very sturdy

Bought as a replacement for a bad bearing on a Delta band saw....so far seems to work great!! Very smooth..

I used this on a delta bandsaw for the lower blade guide.

product was fine. I ordered the wrong size.

The part was exactly what I ordered.