uxcell AXK2035 Thrust Needle Roller Bearings with Washers 20mm Bore 35mm OD 2mm Width 2pcs

I installed this as an upgrade for a John Deere LA115 mower. I had seen youtube videos saying that they greatly improve steering feel. Installation went smoothly, although I did need to file down some casting burrs on the cross beam on the mower to get the snap rings to fit properly. If you do this make sure you clean the filings off completely before you install the bearings. Honestly, I didnt notice much difference from before I installed these bearings (and yes, I did grease them thoroughly and grease readily comes out from between the two washers that serve as races for the bearing). If you think bearings are better than machined and greased surfaces than by all means install these on your mower, but if you grease your mower every season at a minimum, you probably wont notice much difference if any after installing these.

Lawnmower wouldn’t turn left sharply so hubby asked to order these to fix it! It works because I’m the one who mows one acre.

Unfortunately my LT 166 front spindles are not built in a way that will accept these roller bearings. On my old tractor the spindles are welded top and bottom from the factory.

Easy install and easier to get around trees and shrubs …whole lot easier ! !

It feels like I have power steering on lawn mower

The part was great. It made my John Deere turn better.

Install was easy on my mower but I could only use one set (right side front). The left side didnt have enough clearance to put on the snap cap with the washers installed. Steering is still much better than it was.

This bearing kit is a great addition for my Husky lawn tractor. The stock configuration has nothing.

every thing worked real well

Nice product! Worked for the steering on my 20hp Husqvarna riding mower.