Upcut Spiral Flush Trim Router Bit, 1/4 Inch Shank Solid Carbide Flush Trim Router Bits Spiral with Nano Coated by EANOSIC (1/4 Shank Up-Cut)

Needed an upcut/ downcut 1/4 flush trim bit, bought one each. Only used the downcut so far, but it meet my expectations

I do most of my work on the CNC, and we leave tabs to prevent the piece from flying around. I switched to this flush trim bit to remove the tabs and to clean up in the machine doesnt cut all the way through. The cut lined up with the bearing and cleaned so smoothly. I highly recommend it; this will be my shops standard bit.

Thrown some 1 thick hardwoods at it and it has worked great so far!

This seemed like a good value for a template routing bit. I used it on three very small projects It cut through the oak like butter! But as I started the fourth small project the bit broke. No more cheap bits for me! Now I’m stuck

I used this to cut starboard and after probably 20+ feet of cutting seems to still be sharp and the bearing has not failed

Ended up using this to work with some cutting board cutouts. This worked pretty well to template and cut. It was also not nearly expensive as more premium brands. Seemed to cut just fine!!!

Works Great

This bit is a great value. Good quality and leaves a great finish. I like the coating.

This bit is great. I needed to trim down some of my benches at in the shop to make them flush and the bit left a smooth edge. I was very surprised at how nice the edge looked! The bearing rides really smoothly on the piece you are trying to flush trim. You could also use it for templating which I plan to soon. Even after cutting through plywood the bit still looks sharp and with the blue coating should help it wear evenly over time. Highly recommended!

Glad i bought the two pack and had an extra template. Failed after 6 cuts. The second but did fine for this project.