Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Dropped an average of 15C after I replaced the stock CPU bracket on my Gigabyte Aorus Elite AX. This fit very snug and secure on the 13th Gen i9 and I couldnt be happier!

Luckily I stumbled upon a video from Gamers Nexus highlighting these. Bought one because why not. Easy to install and it feels like my cooler is more secure than ever. I am running a z790 board with an Intel 13700k. My temps havent even needed to kick the fans on full blast yet.

Installed this on my Asus Maximus Z790 Hero with no problems. Used factory screws from motherboard and no issues. Make sure to tighten in criss cross pattern to make sure it tightens evenly and doesn’t bend. Highly recommend as this also lowered my CPU temps on my 13900k

Easy to install and help with thermals

Work as advertised, easy to install.

Corrected a warp that caused uneven cooling. Works great to properly secure the processor and allow for proper mounting of a cooling solution. Made from aluminum not plastic. Remains straight under pressure.

Literally dropped temps by 20c just by adding this to my i5 12600k.

Multiple cores of my i9-12900KS CPU always peaked at 100 degC during Cinebench R23 multi-core tests conducted at 21 degC ambient. I tried several thermal paste application methods/patterns, ...but following AIO pump assembly removal, the paste residue pattern was always evenly distributed with no evidence of CPU IHS cover bending/warping from the motherboards standard LGA1700 CPU mounting solution.

I honestly did not watch the review of this plate on Gamers Nexus. I did watch Steves review of the Thermal Grizzly one though but when I saw how much it was going for I was like NOPE. I thought well lets spend $12 and if it sucks then Ill buy Der8auers. I love the lil German guy. Honestly I just slapped this one on. Didnt do all that putting marks on the screws and slowly tightening it down like Mike did. Temps were lower than the GN reviews so I guess I slapped it on my 13900k right. I am using a 360 Lian Li AIO though. So go ahead and buy it. If you get something different then you may need to remount it or have one that may be out of tolerance.

This is my first build in 4.5 years, so this time around I wanted to do tons of research. Im installing a CPU water cooler for the first time ever and researching that a fair amount led me to these CPU brackets. Ive never been satisfied with the cheezy, light weight CPU brackets/fasteners which come standad on MBs. This seemed like a valuable asset for just $14. Im running a 13th Gen Intel on an MSI Z690 ACE MB. As you can see from the pic, the fit looks very clean and the aluminum bracket is well machined. I do not know if temps will be lowered vs the stock guillotine bracket but it sure holds the Intel in place far better. And that can only be good.