Thermalright Intel 12th/13th Generation LGA1700 Anti-Bending Buckle,CPU Stress Bending Correction Fixer, Curved Pressure Plate,Fully Fitted and Fixed Without Trace Installation (Black)

Look I realize Thermal Grizzly basically thought of these as a solution for the 1700 socket bend but they’re super expensive and hard to find in the States. And yes, there are even some builders that believe these contact frames are just a trend and are nothing more than a security blanket for a nonissue. And in same cases that’s absolutely true. Some CPUs IHS are perfectly fine with the socket bend I had 4 that were completely fine with or without the contact frame. But after 15 builds with extreme socket bend making for poor contact with heatsinks I can say this helps more often than not. This contact frame has lowered temps by upwards of 8C on my builds and yes I tested each one. So yes, in my professional opinion Intel created a problem, never addressed it and these are the best solution, especially for anything Core i7 and up. The fact that Thermal Right created these at such a reasonable price and are indeed just as effective as Thermal Grizzly’s (check Gamers Nexus) seems too good to be true, but as I’ve said I’ve used these on 15 builds and they’re worth every penny.

Rather easy to install, I removed the motherboard from the case, and removed all my RAM. It might be doable without taking the motherboard out of the case but I didnt want to try it.

Corrected a warp that caused uneven cooling. Works great to properly secure the processor and allow for proper mounting of a cooling solution. Made from aluminum not plastic. Remains straight under pressure.

Before installing this contact frame on my i7 13700k, I was getting temps around mid 70’s while playing Escape From Tarkov and Insurgency Sandstorm. I have my cpu undervolted by .1 and overclocked by 100mhz (very mild imo). I’m about 5 hours into gaming after installing, and my MAX cpu package temp so far has been 68C, but average is 60C!!! That is a huge improvement from before. Very glad I spend the 12 bucks!

I tried this modification because I didnt like how much torque was being applied to my CPU when using the stock fastener. I am not sure if it was actually bending the chip but it was under too much pressure in my opinion. Temps improved slightly. Easy to remove original and install and looks cleaner than original silver clamp. Comes with tool to remove and reinstall screws.

This product didnt reduce the temps too much, maybe 5C at full load. However, I got this product for the longevity of the CPU health. This way I can guarantee CPU bend doesnt happen over time.

Overall, Good frame, unfortunately I took off my old thermal grizzly (TG) paste and I went from an idle of 35⁰ to 42⁰ on a 13700k. So I reseated the cooler, same story. Finally I went to my microcenter and in a last ditch effort got more TG. After applying it, my cpu dropped to a cool 30⁰ this frame cost a fraction of TGs and gave me a 5⁰ drop and under load got my cpu to stop thermal throttling (on a liquid cooled system mind you)

This does what its supposed to do!

Tengo una motherboard Z690-F de Asus y desde que coloqué el procesador intel i9 13900k hace 3 meses noté que quedó con demasiada presión con su soporte de CPU Stock. Decidí adquirir este LGA1700-BCF para quitarle esa presión al procesador, el cambiarlo fue realmente fácil ya que te incluye la llave para los tornillos que lo fijan a la motherboard. Las Temperaturas que obtenía en mi procesador eran realmente buenas, sin carga Variaban de 32 a 36 grados y con Cargas extremas pegaba a los 80 grados y más. Después de Cambiarlo noté que sin cargas está entre los 28 y 29 grados y con cargas obtuve en promedio 6 grados menos de Temperatura, el rating de mi cooler en Bios me dió un valor de 177 puntos lo cual es excelente para controlar las temperaturas. Este accesorio lo adquirí para evitar esas flexiones del procesador y cuidar su tiempo de vida lo más posible y no tanto por controlar las temperaturas, lo cual fue como un plus el obtener esos 3 o 6 grados menos en la temperatura. Cabe mencionar que tengo activo el overclocking de ASUS con frecuencias del procesador de hasta 6200MHZ. Si deseas cuidar tu inversión de 12va o 13va generación cambiando el adaptador stock, super recomendado este producto para reemplazar ese Frame LGA1700.

Dropped an average of 15C after I replaced the stock CPU bracket on my Gigabyte Aorus Elite AX. This fit very snug and secure on the 13th Gen i9 and I couldnt be happier!