TEMO Carbide Downcut Inlay Router Bit 1/32 Inch Diameter

Used it for some 5mm depth detail work around small lettering in tigerwood. I bought this bit simply to experiment with and based on how thin it is I was expecting to break it immediately. I was very conservative on speeds and feeds on my Shapeoko CNC, and successfully completed my first job. A useful bit added to my collection!

Compared to a high priced but that broke as soon as I used it. This but has worked great and still sharp

Got these to do some detail work on my 3018 Prover and they do seem to work as expected. I have used the 1/8, 1/16 and 1/32 so far and they all cut smoothly. Note I am being extremely conservative on cutting depth and feed rates as Im not ready to test the limits of these, especially the smaller ones. I program to cut the main areas with the larger bits then come back and do increasingly tighter profiles with the smaller bits and it seems to work well. Am cutting on red oak right now and they cut smooth and clean.

Great Bit!!! For the money you can’t beat it. You have to be mindful of DOC and feed rates but it’s a 1/16” bit. I bought two more

Great bit, work perfect for my fine detail project on my CNC router, used slow feed and speed with perfect down-cut quality.

I use these bits on an X-Carve. The’ve been more durable than the 1/32 bits from Inventables.

This bit does what I need it to do. You must be careful to not overload the pressure when cutting.

TEMO is our go-to when we need to purchase more CNC bits. They last a long time (as long as you dont screw up and break them, user error!) They are delivered quick. I purchase their 1/8, 1/16 and 1/32.

Lasted about 5 seconds, then snapped. Looking at the cross section of the broken bit, it looked like a cheap alloy.

Pleased