TEMO Carbide Downcut Inlay Router Bit 1/32 Inch Diameter

Great bit, work perfect for my fine detail project on my CNC router, used slow feed and speed with perfect down-cut quality.

Lasted about 5 seconds, then snapped. Looking at the cross section of the broken bit, it looked like a cheap alloy.

This is my favorite bit. I use it on my CNC to cut small stuff with a great amount of detail with minimal sanding. These don’t break unless I do something dumb, like dropping them or forgetting to switch the router on...

I ordered three of these bits given their price and that I mill a lot of items so its understandable I can go through them quickly. Unfortunately, I feel I broke a record by breaking all 3 within 24 hours of them being delivered. 2 broke almost immediately during milling jobs while one was able to actually complete a job, but it eventually broke immediately on the following job. I am cutting exotic wood species and actually had success with these very same bits and had one that lasted me for about half a year. I am very careful with my equipment and I tend to configure jobs to run at a more cautious level, but even those parameters are too intense for these week bits. These are the most unreliable mills I have ever used. I will be demanding a refund for these weak, faulty products. Do not order these!

TEMO is our go-to when we need to purchase more CNC bits. They last a long time (as long as you dont screw up and break them, user error!) They are delivered quick. I purchase their 1/8, 1/16 and 1/32.

Working as expected

Saved a ton over buying stewmacs overpriced bits. They look and perform equally as well, if not better. A penny saved is a penny earned

Great Bit!!! For the money you can’t beat it. You have to be mindful of DOC and feed rates but it’s a 1/16” bit. I bought two more

I reduced all the speeds and feeds specifically for this bit to make sure it won’t break in the stock, but unfortunately, it’s very fragile and broke once it touch the stock before even the machine starts moving. I don’t recommend this bit, waste of money and time

Compared to a high priced but that broke as soon as I used it. This but has worked great and still sharp